MANUAL V1.0 | Optional Functionalities > p. 54 |
•If a personal calendar recording event does not find the station name in your list of channels, it will put the event into the scheduler and mark it with a ?, indicating that you must assign a channel number to the name. Tap on the line containing the ? and select the Set Channel menu item. You can now scroll through the channel numbers and assign a number to the station name for that event. You only have to do this once. Your ARCHOS device will keep the station name and its channel number.
9.5The Infrared EmittereMITT
•The DVR Station has a
•This is a one time step to set your ARCHOS device to send the cor- rect infrared codes to control your tuner. If you do not plan on mak- ing scheduled recordings, then you do not need to set the infrared emitter code.
•Before beginning this procedure of setting the emitter code, your device must be connected to the DVR Station, which must be pow- ered with the charger/adapter.
•The infrared control works through the reflec- tion of the infrared signal within a room.
•In order to improve the reception of this infra- red signal on your tuner (VCR, cable or satellite box), you could rearrange the position of the DVR Station and/or the tuner such that there are more reflective surfaces (furniture, a wall, etc. - see diagram).
•Good communication between the DVR Station and your tuner also depends on the sensitivity of your tuner’s IR receiver.
Setting the IR Emitter Code
From the Home Screen, tap on 
to access the Setup Screen. Tap on the TV Control icon to highlight it and tap on it again to display the TV control Settings screen.