Trouble Shooting
Q : The picture on the display screen stops, turns off or des not work?
A : Connect the AC Adaptor to the AVIAh; normal operation should resume. Please recharge the battery.
Q : I connected the AVIAh to my computer via the USB but my computer does not recognize it?
A : Verify which operating system is on your computer. If you are using Windows 98 (SE) then insert the Windows 98 (SE) CD and install the USB drivers.
Q : I cannot hear any sound coming from the AVIAh?
A : First, the AVIAh does not have built in speakers, so you are out of luck there. Second, check that the volume level is sufficient for listening through the earphones. You did plug in the earphones in the correct slot…didn’t you?
Q : I push the buttons on the AVIAh and nothing happens?
A : Check if the sliding power switch is in the HOLD position. If it is, slide it out of the HOLD position to restore functionality to all the buttons. The HOLD feature is used to disable the buttons in order to avoid accidental usage.
Q : The picture is too bright or too dark?
A : Adjust the picture controls found in the SET UP menu. There are some presets available for you to use but if you choose you can make adjustments to your liking too.
62