Genius Vero 1 manual Safety Instructions Please Read Carefully, Cleaning, Servicing

2Safety Instructions – PLEASE READ CAREFULLY

•DO NOT use your VERO-1 near water

•DO NOT allow your VERO-1 to get wet

•DO NOT use the VERO-1 near heat sources

•Ensure that cables are NOT positioned in a manner in which they may suffer abrasion, be walked on or trapped.

•DO NOT remove any screws or open the casing of the product

•ONLY use the supplied power adapter

•DO NOT cover the ventilation slots on the VERO-1 *

•DO NOT place anything in the ventilation slots of the VERO-1

•Fit the mains adaptor to an easily accessible socket, located near the radio

*Your GEO-1 should be positioned to ensure good ventilation so that it will not overheat. It is recommended to allow a minimum of 5cm free space around it when choosing its location

2.1 Cleaning

•UNPLUG your VERO-1 before you clean it

•DO NOT use a liquid or aerosol cleaner

•DO NOT use an abrasive cleaning product

•Clean your VERO-1 ONLY using a soft damp (not wet) cloth

2.2 Servicing

•DO NOT attempt to repair any part of your VERO-1

•Contact your dealer if you have any doubt or questions regarding the installation or operation of your VERO-1

Page 4/16