Getting Started, Switching On for the First Time

4 Getting Started

4.1 Switching On for the First Time

•For best reception fully extend the antenna on the VERO-1.

•Connect the power adapter provided to the VERO-1. Now plug into the mains socket and switch mains on.

•Power your radio by the switch on the right hand side of the radio

•Press the STANDBY button to turn the device on.

•The VERO-1 will now search for available stations. Allow the device to perform this function. This may take up to one minute (depending on number of stations available locally).

•The VERO-1 will automatically tune into the first available station

•If required, reposition the antenna in order to achieve the best reception quality.

•The optimum reception on any DAB product is normally achieved if the product is positioned as close as possible to a window.

NB It is advisable to perform a ‘full scan’ to benefit from all the DAB channels available in your area (see Full Scan below)

4.2 Auto Scan / Full Scan

Your VERO-1 will perform a fast auto scan the first time you switch it on as detailed above – you can repeat this at any time by pressing the scan button. But to ensure that you are receiving all of the channels available to you it is advised that you perform a Full Scan. To perform a Full Scan:

• Press and hold the auto-scan button for 3 seconds

4.3No Stations Available

If no stations are found:

Page 6/16