Connect power
Caution
• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the clock radio.
• Risk of electric shock! When you disconnect the power supply, always pull the plug from the socket. Never pull the cord.
1 Connect the power plug to the power outlet.
Socket
Set the clock
1In standby mode, press and hold SELECT for two seconds.
»[SYNC ON] is displayed and [ON] begins to blink.
2Press PRESET to select ON or OFF.
»If you select [ON], the clock radio reads the DAB/RDS time and sets the clock automatically.
16