»If you select [OFF], the clock radio turns off the time synchronization.
3Press SELECT to confirm.
»The time format [24H] or [12H] begins to blink.
4Press PRESET to select 24H or 12H.
5Press SELECT to confirm.
»The hour digits are displayed and begin to blink.
6Press PRESET to set the hour.
7Press SELECT to confirm.
»The minute digits are displayed and begin to blink.
8Press PRESET to set the minute.
9Press SELECT to confirm the clock setting.
Note
•The accuracy of the transmitted time depends on the RDS station that transmits the time signal.
•If the power supply is disconnected, the settings and clock are saved for 3 minutes.
17