2 Press AL1/AL2 repeatedly to activate or deactivate the alarm timer.
»»[AL1] or [AL2] is displayed if the alarm timer is on and disappears if it is off.
•To stop the ringing alarm, press the corresponding AL1/AL2.
»»The alarm repeats ringing for the next day.
Snooze alarm
When alarm sounds, press SNOOZE.
»»The alarm snoozes and repeats ringing nine minutes later.
Set sleep timer
This clock radio can switch to standby mode automatically after a preset period.
Press SLEEP repeatedly to select the sleep timer period (in minutes).
»»When the sleep timer is activated, 
appears.
To deactivate the sleep timer, press SLEEP repeatedly until OFF appears.
Adjust display brightness
Press BRIGHTNESS repeatedly to select different brightness levels.
6Product information
Note
•• Product information is subject to change without prior notice.
Specifications
Amplifier
Rated Output Power | 2 X 2 W RMS |
Frequency Response | |
Signal to Noise Ratio | >65 dB |
Total Harmonic Distortion | <1% |
Aux Input (MP3 link) | 0.6 V RMS 10 |
| k ohm |
Tuner (FM)
Tuning range | 87 |
| MHz |
Tuning grid | 50 KHz |
Sensitivity |
|
- Mono, 26 dB S/N Ratio | <22 dBf |
- Stereo, 46 dB S/N Ratio | <46 dBf |
Search Selectivity | 30 dBf |
Speakers
Speaker Impedance | 4 ohm |
Sensitivity | >82 dB/m/W |
EN 13