Turn on
Press 
.
»»The clock radio switches to the last selected source.
Switch to standby mode
Press 
to switch the clock radio to standby mode.
»»The clock (if set) is displayed.
Set time and date
1 In standby mode, press and hold TIME SET on the back of your clock radio for more than two seconds.
»»[12H] or [24H] begins to blink.
2 | Press | / |
| repeatedly to select 12/24 |
| ||||
3 | hour format. |
|
| |
Press TIME SET to confirm. | ||||
4 | »»The hour digits begin to blink. | |||
Repeat steps | ||||
Note
•• If clock is not manually set, when iPod/iPhone is connected, the unit synchronizes time from the iPod/ iPhone automatically.
Tip
•• The accuracy of the transmitted time depends on the docked iPod/iPhone that transmits the time signal.
4 Play
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through this clock radio.
Compatible iPod/iPhone
The unit supports the following iPod, iPhone models:
Made for.
•iPod classic
•iPod touch (1st, 2nd, 3rd, and 4th generation)
•iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation)
•iPhone 4S
•iPhone 4
•iPhone 3GS
•iPhone 3G
•iPhone
Install HomeStudio App
Philips HomeStudio app brings a suite of new features to your clock radio, including FM radio programming and a
Note
•• Make sure that your iPod/iPhone is connected to the Internet.
1 Press SOURCE repeatedly to select DOCK mode.
2 Insert your iPod/iPhone into the dock.
8EN