Troubleshooting, General information

General information

AC power (power	Brand name: Philips;
adapter)	Model:Y12FE-050-
	2000B;
	Input: 100-240 V~, 50-
	60 Hz; 0.35 A;
	Output: 5 V 2000
	mA;
Operation Power	<10 W
Consumption
Standby Power	<1 W
Consumption
Dimensions: Main
Unit (W x H x D)	283 x 118 x 112 mm
Weight:
-Main Unit	0.658 kg
-With Packing	0.820 kg

7 Troubleshooting

Warning

•• Never remove the casing of this device.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support).When you contact Philips, make sure that the device is nearby and the model number and serial number are available.

No power

•• Ensure that the AC power plug of the unit is connected properly.

•• Ensure that there is power at the AC outlet.

No sound

•• Adjust the volume.

No response from the unit

•• Disconnect and reconnect the AC power plug, then turn on the unit again.

Poor radio reception

•• Increase the distance between the unit and your TV or VCR.

•• Fully extend the FM antenna.

Alarm does not work

•• Set the clock/alarm correctly.

Clock/alarm setting erased

•• Power has been interrupted or the power plug has been disconnected.

•• Reset the clock/alarm.

14EN