Basic Operation |
| DAB Radio | |
|
|
|
|
DAB Radio
Basic operation
1 | Press ON•OFF to power on the set. |
| ➜ The LCD lights up. |
2 | Press DAB•FM to select DAB or FM mode. |
| ➜ The radio will tune to a DAB station if |
| DAB mode is selected. |
| ➜ The radio will tune to a FM station if FM |
| mode is selected. |
3 | To adjust volume, press VOLUME 3 4. |
4 | To improv DAB/FM reception, extend and |
| turn the telescopic antenna. Reduce its |
| length if the signal is too strong. |
Switching on DAB radio
For the first time when DAB mode is switched on, AJ5100 will perform an auto scan (see 2).Then all the available DAB sta- tions will be stored on the set, and the radio will tune to the first available station.
1Press ON•OFF to power on the set.
➜The LCD lights up.
2Press DAB•FM to select DAB mode if "FM" is displayed.
➜"Philips DAB & FM Radio" is displayed briefly (see 3), then the radio auto tunes to a station.
Scanning for DAB stations
New stations and services will be regularly added in the DAB broadcast.To make new DAB stations and service available on your DAB radio, a search is needed.
DAB Scanning:
•In DAB mode, press SCAN to perform a search for DAB stations.
Storing DAB presets
You can preset up to 10 DAB stations on the 10 preset buttons each for easy access.
Selecting a preset DAB sta- tion
1In DAB mode, press a preset button on the top of the set to select presets
•To select one of presets
Helpful hints:
–If you have not yet stored a DAB station in one of the presets, "Empty preset" will be dis- played.The display will revert to the previous- ly selected station after a few seconds.
•To further improve DAB reception, you may also perform manual tuning (See Manual Tune)
Helpful hints:
–If there is no DAB coverage currently avail- able, or DAB signal is too weak, in your area, no DAB station will be found, and information like "Station not available" will be displayed.
Dimming LCD brightness
1Press and hold INFO for 2 seconds to switch Dm on or off.
➜Auto dim on will be activated if dim function is off in the last setting.
➜Auto dim off will be activated if dim function is on in the last setting.
2If Dim function is activated and there is 15 seconds of button inactivity, the LCD bright- ness will be decreased to save power. Pressing any button will resume the original LCD brightness.
Changing DAB stations
1In DAB mode, press 1 / 2 repeatedly until your desired station name is displayed.
➜The selected station name appears on the second line of the display.
2Press SELECT to confirm.
➜The radio will immediately tune to the selected station.
About station display symbols
You may see some symbols displayed before the station names as follows:
:The symbol indicates that the station is one of ten
?:The symbol indicates that the station is not currently available, or not active.
>>:This symbol indicates that the station is a primary station with secondary service.
<<:This symbol indicates that the station is a secondary station.
1In DAB mode, In DAB mode, press 1 / 2 repeatedly until your desired station name is displayed.
•To select desired DAB station, you may also perform manual tuning (see Manual Tune).
2Press and hold one of the preset buttons
➜"Station Saved" is displayed briefly on the second line of the display. and the stored preset number will be displayed.
•To save on presets
Helpful hints:
–If you have already saved a DAB station in that preset location, it will be overwritten by a new station.
–When you store DAB stations, these do not overwrite your FM presets.
Resetting to the factory set- ting (also available in FM mode)
Resetting to the factory setting will delete all of the preset stations.
1In DAB or FM mode, press and hold MENU.
➜"Press SELECT to confirm reset" is display.
2To reset, press SELECT.
➜All the presets will be deleted, and "Philips DAB & FM Radio" is displayed.
•To not to reset, wait a few seconds until "Press SELECT to confirm reset" disappears.
➜The radio will revert to the previous operating status.