Philips AJ5100/05 Supplied Accessory, Front panel see, Top and back panels see, Power Supply

Page 3

English

Controls/Power Supply

Power Supply

General Information

Supplied Accessory

– 9V AC/DC power adaptor

Front panel (see 1)

1ON•OFF switches on/off the set

2DAB•FM

selects DAB (on Band 3 ), or FM mode

3SCAN

DAB: – auto search and store all DAB sta- tions

FM: – tunes to a station

4INFO

in DAB mode, selects station information in seven types

switches DIM on or off (press and hold for 2 seconds)

5LCD display

displays DAB and FM radio information

6MENU

in DAB mode, enables access to advance setup options

activates resetting mode (press and hold for 2 seconds)

7VOLUME 3 4 – adjusts volume level

1 / 2

in DAB mode, selects DAB stations, or selects menu options

in FM mode, fine tunes a station

adjusts sleep timer options

SELECT

in DAB/sleep mode, selects an selection

enters sleep timer setting mode (press and hold for 2 seconds)

Top and back panels (see 1)

8Preset buttons 1/6, 2/7, 3/8, 4/9, 5/10

stores and recalls 10 DAB/FM stations

9SHIFT

switches from 1-5presets to 6-10presets

0Telescopic antenna

improves DAB and FM reception

!p – 3.5 mm stereo headphone socket Helpful hints: The speakers will be muted when headphones are connected to the set.

@9V DC jack

– connects the supplied power adaptor

#Battery door – opens to insert 6 x 1.5V R-14/ UM-2/ C-cells

CAUTION

High voltage! Do not open.You run the risk of getting an electric shock. The machine does not contain any user-serviceable parts.

Modification of the product could result in hazardous radiation of EMC or other unsafe operation.

This set complies with the radio interference requirements of the European Union.

Power Supply

Whenever convenient, use the mains supply cord if you want to conserve battery life. Make sure you remove the plug from the set and wall outlet before inserting batteries.

Batteries (not included)

1Open the battery door and insert 6 batteries, type R-14, UM-2or C-cells, (preferably alkaline) with the correct polarity as indicated by the "+" and "" symbols inside the com- partment (See 1).

2Replace the battery door, making sure the bat- teries are firmly and correctly in place.The set is now ready to operate.

Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst:

When inserting new batteries, do not try to mix old batteries with the new ones.

Remove the batteries if the set is not to be used for a long time.

Batteries contain chemical substances, so they should be disposed of properly.

Using AC power

The set is operated with 9V DC power. Use only the supplied AC/DC adaptor. Any other AC/DC adaptor may damage the set.

1Check if the power voltage, as shown on the type plate located on the rear of the set, corresponds to your local power supply. If it does not, consult your dealer or service center.

2Connect the supplied power adaptor to the 9V DC jack (located on the rear panel) and the wall socket.The set is now connected and ready for use.

3To switch the set off completely, withdraw the power adaptor from the wall socket.

Install the unit near the AC outlet and where the power adaptor can be easily reached.

Disconnect the power adaptor from the wall socket to protect your set during heavy thun- derstorms.

AC/DC adaptor is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use.To be completely disconnected the appa- ratus from supply mains, the AC/DC adaptor of the apparatus shall be disconnected from the mains socket outlet completely.

The type plate is located on the rear of the set.

General information

About Digital Audio Broadcasting (DAB)

DAB digital radio is a new way of broadcast- ing radio via a network of terrestrial transmit- ters. It provides listeners with more choice and information delivered in crystal clear, crackle-free sound quality.

-The technology allows the receiver to lock on to the strongest signal it can find.

-With DAB digital stations, there are no fre- quencies to remember, and sets are tuned by station name, so there is no re-tuning on the move.

What is a multiplex?

Digital radio operation is made up of a single block of frequencies called a multiplex. Each multiplex works within a frequency spec- trum, such as Band III for DAB broadcasts.

Helpful hints:

You will receive DAB stations only within your DAB transmission area.

DAB Broadcasters and DLS

Each DAB broadcaster (or multiplex opera- tor) also provides text and audio data ser- vices. Some programmes are supported by Dynamic Label Segments (DLS).This is data which you can read as scrolling text on your DAB radio display. Some stations transmit the latest news, travel, and weather, what's on now and next, website addresses and phone numbers.

For more information on digital radio cover- age and services, please visit www.drdb.org

Do not mix battery types: e.g. alkaline with car- bon zinc. Only use batteries of the same type for the set.

Image 3
Contents PDCC-AZ-0636 Brukerhåndbok Brugervejledning188.92MHz FM Radio 88.10MHz Top and back panels see Supplied AccessoryPower Supply Front panel seeChanging DAB stations Switching on DAB radioBasic Operation DAB Radio Basic operationDynamic Range Control DRC Using the Menu controlChanging the DAB station information Manual tuneFM Radio Safety & Maintenance SeeTroubleshooting Disposal of your old product Environmental information