Step 1 2 3 4 Basic operations
1 POWER
Switch on.
STEREO mode
L |
| R |
2
8
SPEAKERS
Turn SPEAKERS on.
SPEAKERS
|
| SOUND MODE |
|
| |
SPEAKERS | STEREO | |
Use this mode to play digital or analog stereo sources or to play surround sources through two speakers. When surround sources are played in this mode, the sounds intended for the other speaker channels are played through the front speakers.
3 INPUT SELECTOR
DIGITAL INPUT |
Select input.
,TUNER ,/CD ,/DVD /
/ | / |
TAPE ,/VCR 2 ,/VCR 1 ,/TV
For CD, DVD, TV
Select digital or analog input.
SURROUND mode
L | C | R |
|
SL |
| SR | LFE |
|
| SOUND MODE |
|
|
|
|
| ||
SPEAKERS |
| SURROUND | ||
DIGITAL
Select this mode when you are playing a digital surround source (Dolby Digital or DTS).
Also select this mode when playing analog or digital stereo sources. The Dolby Pro Logic 2 processor works not only on
sources recorded with Dolby Surround, but also on any stereo source. The following
DOLBY
4
modes are available when using Dolby Pro Logic 2.
SFC modes
SOUND MODE 
SPEAKERS
SFC
PRO LOGIC 2
Step
4 | DSP |
SOUND MODE |
5
6 VOLUME
DOWNUP
Select the DSP sound mode.
Start play of the source.
Adjust the volume.
Enjoy an enhanced sound experience with greater presence and spread by using these SFC (sound field control) modes with PCM or analog stereo sources.
The SFC modes cannot be used if the input signal is Dolby Digital or DTS. Choose from the
following modes.
|
|
|
|
|
| < |
| > |
|
|
|
|
|
|
RQT6847
10
When you finish listening
Be sure to reduce the volume and press [POWER, 8] to switch the unit to standby.
For your reference
In rare cases, the unit may have trouble recognizing the digital signals on discs.
¡With the PCM signals on CDs, this may cause the beginning of a track to be cut off. Engage the PCM FIX mode if this occurs.
¡With DTS, the signals may not be recognized at all. Engage the DTS FIX mode if this occurs.
While the input source is selected and digital input is engaged:
Press and hold [DIGITAL INPUT].
The current mode is displayed. Press again to change the mode. Each time you press the button:
AUTO / PCM FIX / DTS FIX
/
When a FIX mode is on, the unit cannot process other signals. This may cause noise to be output. Select “AUTO” if this occurs.
The selected mode is stored for each input source even if the unit is turned off.
Notes on using the Digital Signal Processor
The digital signal processor in this unit can decode the following signals:
¡Dolby Digital ¡DTS ¡PCM
It cannot decode:
¡Other digital signals, such as MPEG
¡PCM with sampling frequencies of 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz
¡Dolby Digital RF signals from a laser disc player