Emerson CKT9100 Telephone Operating Instructions, Call Waiting and Caller ID Service Information

Page 16

TELEPHONE OPERATING INSTRUCTIONS

Note: This model is designed for normal residential phone service only. It cannot be used with PABX systems.

Call Waiting and Caller ID Service Information

This SmartSet® telephone clock radio is compatible with Caller ID and Call Waiting service provided by your local telephone company. Both the Caller ID and Call Waiting features are not normally part of the basic telephone service package. If you have already subscribed to these extra services, there is nothing further to do. Your SmartSet® telephone clock radio is ready to use.

If you do not currently subscribe to Call Waiting and Caller ID services, you may still use this SmartSet® telephone clock radio as you would any normal telephone, however the Caller ID information will not appear in the display. If you want to take advantage of the Call Waiting and Caller ID features of this SmartSet® telephone clock radio you must contact your local telephone service provider and subscribe to these services. In most cases there will be an additional monthly charge for these services.

With the Call Waiting feature you will hear an audible signal on the telephone to alert you that you have another call waiting. The signal may be a “click” sound or possibly a soft “beep”. Your local phone company selects the signal sound. When you hear that signal you may press the FLASH button on the handset to speak to the second caller briefly, then press the FLASH button again to return to the first caller. With the Caller ID feature you will be able to see the name and telephone number of the calling party on the Caller ID display. You can then decide if you wish to answer the call or not. You can also automatically call back any of the numbers stored in the Caller ID memory, up to 80 numbers maximum. Both these features will be explained in more detail later in this manual.

15

CKT9100_090606.p65

15

6/9/2006, 11:00

Image 16
Contents CKT9100 Important Safety Instructions CKT9100090606.p65 2006 CKT9100090606.p65 2006 IM Portant Notes FCC InformationFCC wants you to know Ringer Equivalence Number RENPreparation for USE Unpacking and SET-UPInstalling The Telephone Memory Back-up Battery Install the telephone memory back-up battery as followsConnecting The Telephone Cords Low Battery IndicationLine Cord Disconnecting The Telephone Cords Coiled Handset CordPower Source Protect Your FurnitureLocatio N of Contro LS and I Ndicators TOP Panel Telephone Handset Telephone LCD Display Call Waiting and Caller ID Service Information Telephone Operating InstructionsCaller ID Display Set-up and Adjustments CKT9100090606.p65 2006 Other Adjustments Handset Volume LevelTelephone Ringer Level TONE/PULSE Dialing SelectorCaller ID Display Viewing Angle Storing Numbers In The Handset Memory To store numbersReceiving Calls Call WaitingMaking Calls Last Number Redial MemoryCaller ID Operation CKT9100090606.p65 2006 To Delete a Number from The Caller ID Memory To Dial a Number Stored In Caller ID MemoryTo Delete All Numbers From The Caller ID Memory Setting the TIME, the First Time Clock Radio Operati NG I Nstructi ONSDate Display Daylight Saving and Leap Year AdjustmentsYear Display Manual Time Adjustments Adjusting the Wake UP TimesSelecting the Alarm Mode Checking the Wake UP Times and Alarm ModeListening to the Radio Antenna InformationWake to Radio Wake to Buzzer Snooze AlarmRadio and Buzzer Operation Sleep to Music Timer Dimmer ControlChanging the Lithium Battery Be Careful not to Lose this Small ScrewBattery holder slot Turn the holder up side down Resetting the Clock After a Total Memory Loss Important Note Care and M Aintenance Limited Warranty CKT9100-090606-02