Lamp Brightness Control

This SmartSet® Clock Radio includes a unique Touch Pad on the top panel to control the brightness of any nightstand or table lamp that is connected to the special lamp socket on the back of the radio. The lamp control works with normal 1-way or 3-way incandescent bulbs up to 150 watts maximum.

I MP O R TA N T ! D O N O T C O N N E C T L A MP S U S I N G C O MPA C T FLUORESCENT BULBS, HALOGEN BULBS, HIGH INTENSITY BULBS, OR INCANDESCENT BULBS OVER 150 WATTS TO THE LAMP SOCKET ON THIS RADIO.

CAUTION: THIS OUTLET IS ONLY USED WITH NORMAL INCANDESCENT LAMPS RATED AC120V, 150WATT MAXIMUM BULBS. DO NOT CONNECT FLUORESCENT LAMPS, HALOGEN LAMPS, OR ANY OTHER APPLIANCE OR DEVICE.

1.) Remove the plastic socket cover from the lamp socket as shown.

You should retain the socket cover and re-install it in the lamp socket if a lamp will not be connected to the socket for an extended period of time.

2.) Connect your lamp to the lamp socket as shown.

•1-Way Bulbs (150W Max) - Switch the lamp ‘On’as usual.

•3-way Bulbs (150W Max) - Switch the lamp ‘On’as usual and set it to the brightest setting.

CKS3088_072106.p65

21/7/2006, 15:04