3.) Lightly touch the LAMP CONTROL Pad on the top panel of the radio to begin dimming the lamp. Each time you touch the LAMP CONTROL Pad the brightness will be reduced by approximately 25% until the lamp goes ‘Off’ completely.
Once the lamp is ‘Off’you can continue touching the LAMP CONTROL Pad to turn the lamp ‘On’again and increase it to full brightness. You may leave the lamp at any of the 4 brightness levels.
IMPORTANT! Remember that you must switch your lamp ‘On’ to its maximum brightness as usual in order for the LAMP CONTROL Pad to operate. Touching the LAMP CONTROL Pad has no effect if the lamp is switched 'Off'.
4.) If you continue to keep your finger on the LAMP CONTROL Pad the brightness will continue to increase and decrease until you remove your finger from the control pad.
22
CKS3088_072106.p65 | 22 |