Listening To The Radio
1.) Slide the Function selector (RADIO/CD/BUZZ) switch, located on the right side cabinet, to the “RADIO” position.
2.) Slide the Band selector (AM/FM/FM ST.) switch, located on the right side cabinet, to the desired band.
3.) Press the POWER button on the front panel to turn the system ‘On’. The Power indicator comes ‘On’.
4.) Tune to the desired station by slowly rotating the TUNING control on the right side.
If you tune to an FM Stereo station the FM ST. indicator will come ‘On’.
PM
AL 1 | AL 2 |
Note: If you tune to a distant FM stereo station and the reception is noisy or weak, slide the Band selector to the FM position. The reception will usually improve but the sound will no longer be in stereo.
5.) Adjust the VOLUME control, located on the left side of the cabinet, to the desired level.
6.) When you are finished listening press the POWER button on the front panel to shut the radio ‘Off’. The POWER indicator goes ‘Off’.
11
CKD2300_060305.p65 | 11 |
3/6/2005, 11:04