Programmed Playback
Use the Programmed Playback feature to play up to 20 tracks on a disc in any desired order. You may also program a particular track to play several times within a programmed sequence if desired.
Note: You cannot program a disc while it is playing. Press the STOP button to stop playback and then follow the programming steps below.
1.) Load your disc as usual and wait until the display shows the total number of tracks on the disc.
2.) Press the PROGRAM button on the front panel. The PROGRAM indicator flashes and Program number “P 01” appears in the display.
PM
AL 1
PM
AL 1
AL 2
AL 2
3.) Press the SKIP/SEARCH FWD 
or SKIP/SEARCH REV 
buttons to select the first track number to be programmed.
Example: Track number 07.
When the desired track number flashes in the display press the PROGRAM button again. Track “07” is now entered in Program Memory number “01”. The program number advances to “P 02”.
AL 2
AL 2
Important: You must enter a track number in the program memory while the PROGRAM indicator is flashing. If the PROGRAM indicator stops flashing and the display returns to the correct time, press the PROGRAM button again and then select the desired track number within 10 seconds.
4.) Repeat step 3, selecting a different track number each time until you have entered up to 20 tracks in the program memory.
To confirm the program after you have entered the last track press the PROGRAM button repeatedly. The display will scroll through all the tracks you programmed in sequence.
18
CKD2300_060305.p65 | 18 |
3/6/2005, 11:04