Operating Your Furnace, Lubrication Requirements

5.Possible Emergency: Main electrical circuit breaker for furnace cannot be reset without tripping again or new fuses continue to blow.

ACTION:

a.Move gas valve control level to OFF.

b.Call your local qualified service technician or gas supplier.

SECTION 5 • OPERATING YOUR FURNACE

After reading the Safety Information and Precautions follow Operating Instructions on front door of furnace and instructions repeated on Page 8.

WARNING

If you do not follow these instructions exactly a fire or explosion could occur resulting in damage, injury or death.

WARNING

Never use tools to move gas control knob. Only use your hand. If gas control knob will not move by hand, do not force it or try to repair it. Call a qualified installer, service agency or gas supplier. Forcing knob can cause gas to leak which could result in fire or explosion.

Properly operating your furnace requires certain abilities, mechanical skills and tools. If you are uncertain about your abilities or if you lack proper skills or tools, do not proceed. Instead, contact a qualified installer, service agency or gas supplier.

An automatic ignition device lights the burners. Do not try to light manually. See Figure 2 on Page 8 for step by step instructions.

SECTION 6 • PROPER MAINTENANCE OF YOUR FURNACE

You need special abilities, mechanical skills and tools to maintain your furnace properly. If you are uncertain about your abilities or if you lack proper skills or tools, do not try to maintain or repair your furnace yourself. Instead, contact a qualified installer, service agency or gas supplier.

6.A IF YOU SMELL GAS OR ANY UNFAMILIAR SMELL WHILE WORKING ON YOUR FURNACE:

1.Do not try to light main burners.

2.Do not touch or turn on any electrical switch.

3.Do not use any phone in your building.

4.Immediately call your gas supplier from a neighbor’s phone. Follow gas supplier’s instructions.

5.If you cannot reach your gas supplier, call fire department.

6.B LUBRICATION REQUIREMENTS

The main blower motor, outdoor fan motor, and the induced draft blower motor are permanently lubricated, and no maintenance is required.

6.C MAKE SURE AIR FILTER(S) IS IN PLACE

Ask your installer, local qualified service technician or gas supplier to make sure your filter(s) is in place properly. Become familiar with its location and procedures for removing, cleaning and replacing it.

Recommended filter sizes are shown below.

Main System Filter: 20 X 30 X 2 Throwaway

See Figure 3 on Page 10 for filter locations.

WARNING

Operating furnace without clean air filter(s) can damage blower motor, heat exchanger or air conditioning system components.

This can cause system failure which could result in damage or injury.

Manual 2100-366 Page 8

WG-Series specifications

The Bard WG-Series is a notable range of water-source heat pump units, designed to provide efficient heating and cooling solutions tailored to residential and commercial applications. This series stands out for its compact design, energy efficiency, and innovative features that cater to modern demands for sustainability and reliability.

One of the primary characteristics of the Bard WG-Series is its use of advanced heat pump technology. These units harness the energy from water sources, whether it be ponds, lakes, or groundwater, which allows them to operate efficiently year-round. This sustainable approach reduces reliance on traditional fossil fuels, making it a favored choice for environmentally conscious users seeking to lower their carbon footprint.

Key features of the Bard WG-Series include its high-efficiency scroll compressors which enhance the unit's performance by optimizing energy consumption. This technology not only supports efficient heating and cooling cycles but also contributes to quieter operation compared to conventional systems, ensuring comfort within the living or working environment.

Another important aspect of the Bard WG-Series is its ability to provide both heating and cooling in one compact unit. This dual functionality minimizes the need for separate systems, streamlining installation and maintenance processes while also reducing overall system costs. The units are designed with user-friendly interfaces that allow for easy monitoring and management of system performance.

The build quality of the Bard WG-Series is commendable, featuring durable, corrosion-resistant materials that ensure longevity and reliability in various environmental conditions. Enhanced insulation within the units helps maintain temperature consistency, further increasing energy efficiency and comfort levels.

Additionally, Bard has incorporated advanced controls and automation features in the WG-Series that allow users to remotely manage their heating and cooling needs. Integration with smart home systems is possible, providing users with greater convenience and control over their HVAC systems.

Overall, the Bard WG-Series represents a significant advancement in heat pump technology, marrying efficiency with sustainability. Its innovative features cater to contemporary energy demands, making it an excellent choice for those seeking reliable, eco-friendly building solutions. With its combination of performance, user-friendliness, and durability, the Bard WG-Series is poised to meet the heating and cooling needs of a diverse range of applications.