Possible Emergencies Recommended Actions

4.B POSSIBLE EMERGENCIES AND

RECOMMENDED ACTIONS

WARNING

If gas or electricity is off due to an emergency, only a qualified installer, service agency or gas supplier should turn it back on. Doing it yourself could result in damage, injury or death.

1.Possible Emergency: Smelling gas or other unfamiliar smell; or not knowing what may be wrong or that to do about it.

ACTION: For your safety –

a.Leave your house or building immediately.

b.Go to a neighbor’s or another building.

c.Use their telephone.

d.Call your gas supplier. Tell them you smell gas and give them your name and address.

e.If you cannot reach gas supplier, call fire department.

WARNING

Three important things not to do –

1.Don’t try to light any gas appliances.

2.Don’t touch any electrical switches

3.Don’t use the telephone in your house or building.

Any of the above may cause a spark which could cause a fire or explosion resulting in damage, personal injury or death.

2. Possible Emergency: Your thermostat is set

below room temperature; yet even though the blower is on, the air coming from your room registers continually gets hotter.

ACTION:

a.Turn room thermostat to its lowest or OFF setting.

b.If you can do so safely, turn gas off. Use manual shut-off valve at gas meter or on propane (LP) gas tank. You may need a wrench or tools. If you can safely turn off electricity at the main circuit panel, do so. If you cannot do these things safely, leave your home or building immediately. Call your gas supplier or fire department from a neighbor’s phone for help.

3.Possible Emergency: Your thermostat is set above room temperature. The blower is on but the air coming from your room registers is hot, then cold, then hot, then cold in a continuing cycle. This condition indicates lack of airflow through furnace.

ACTION:

a.Make sure air filter is clean and installed correctly.

b.Check that registers and return air grilles are open and unobstructed.

c.If condition continues, call your local qualified service technician or gas supplier.

4.Possible Emergency: While furnace is operating, you smell unfamiliar odors that go away when furnace is off.

WARNING

Unfamiliar odors may mean gas or aldehydes are present which could result in damage, injury or death.

ACTION:

a.Turn thermostat to its lowest or OFF setting.

b.Move gas valve control level to OFF.

c.If blower is not operating, immediately turn off electricity to furnace using shut-off device near furnace or at main circuit panel.

d.If blower is operating, wait five minutes for furnace to cool down and then turn off electricity to furnace using shut-off device near furnace or at main circuit panel.

e.Call your local qualified service technician or gas supplier.

Manual 2100-366 Page 7

WG-Series specifications

The Bard WG-Series is a notable range of water-source heat pump units, designed to provide efficient heating and cooling solutions tailored to residential and commercial applications. This series stands out for its compact design, energy efficiency, and innovative features that cater to modern demands for sustainability and reliability.

One of the primary characteristics of the Bard WG-Series is its use of advanced heat pump technology. These units harness the energy from water sources, whether it be ponds, lakes, or groundwater, which allows them to operate efficiently year-round. This sustainable approach reduces reliance on traditional fossil fuels, making it a favored choice for environmentally conscious users seeking to lower their carbon footprint.

Key features of the Bard WG-Series include its high-efficiency scroll compressors which enhance the unit's performance by optimizing energy consumption. This technology not only supports efficient heating and cooling cycles but also contributes to quieter operation compared to conventional systems, ensuring comfort within the living or working environment.

Another important aspect of the Bard WG-Series is its ability to provide both heating and cooling in one compact unit. This dual functionality minimizes the need for separate systems, streamlining installation and maintenance processes while also reducing overall system costs. The units are designed with user-friendly interfaces that allow for easy monitoring and management of system performance.

The build quality of the Bard WG-Series is commendable, featuring durable, corrosion-resistant materials that ensure longevity and reliability in various environmental conditions. Enhanced insulation within the units helps maintain temperature consistency, further increasing energy efficiency and comfort levels.

Additionally, Bard has incorporated advanced controls and automation features in the WG-Series that allow users to remotely manage their heating and cooling needs. Integration with smart home systems is possible, providing users with greater convenience and control over their HVAC systems.

Overall, the Bard WG-Series represents a significant advancement in heat pump technology, marrying efficiency with sustainability. Its innovative features cater to contemporary energy demands, making it an excellent choice for those seeking reliable, eco-friendly building solutions. With its combination of performance, user-friendliness, and durability, the Bard WG-Series is poised to meet the heating and cooling needs of a diverse range of applications.