5.Press ZERO/MODE to see the combined weight of the two items.
6.Press ZERO/MODE again to reset the display to 0.
7.Repeat these steps until all items have been added.
Note: Adhere to the maximum weight capacity of the scale.
Minus Function
If you add multiple items to the scale at one time to get a total weight, you can identify the value of a single item or ingredient by using the Minus Function:
1.Add item(s) to the scale; display shows total weight.
2.Press ZERO/ON/OFF to reset display to 0.
3.Remove an item.
4.Display shows the weight of the removed item with the Minus Function indicator (negative value is shown on the display).
5.Remove both items to see the combined weight of the two items.
6.Repeat steps as needed.
Warning Messages
Replace battery (see page 4).
Maximum capacity has been exceeded. Remove items to prevent damage.
Power the Unit ON/OFF
The scale will automatically power off when the display shows 0 or the same weight for 2 minutes. Press ZERO/ON/OFF to power the scale on. To power off manually, press ZERO/ON/OFF when the LCD is showing 0, or press and hold ZERO/ON/OFF for 3 seconds if a weight is shown on the display.
Storage
The scale can stored on a level surface or can be hung by using the integrated hang hole.
6