Brady BP-PR PLUS Series manual Power-Save mode, Button functions, Ready, Printing Label, Pause

BP-PR PLUS series

Operating panel

4.2.2Power-Save mode

If the printer is not used for some time, it switches to Power-Save mode automatically.

The display shows the graphic and button illumination is switched off.

To exit Power-Save mode:

⇒ Press any button on the navigator pad.

4.2.3Button functions

Button	State	Function
menu	Ready	Go to offline menu (see “Configuration Instructions“)
feed	Ready	Advances an empty label
pause	Ready	Repeat printing of last label
	Printing Label	Pause print job,
		printer switches to Pause mode
	Pause	Continue print job,
		printer switches to Printing Label mode
	Fault - correctable	Continue print job after error recovery,
		printer switches to Printing Label mode
cancel	Ready	Clear print buffer,
		repeated printing of the last label is then not possible
	Printing Label	Press briefly→		cancel current print job
	Pause	Press and hold→ cancel current print job and delete all
	Fault - correctable			print jobs
	Fault - irrecoverable
	System error	Press →	if the error occurs repeatedly, notify the Service
		Department
↵ button	Fault - correctable	Call up help→ brief information on error recovery is dis-
	Fault - irrecoverable	played
	Offline menu	Press briefly to enable value selection on the parameter
		level, accept a selected value or start a function
		Press and hold (> 2 sec.) to exit the parameter level without
		accepting the parameter setting
W	Offline menu	Select menu items on a menu level or to select values on the
		parameter level
		Press button on the top menu level several times, if neces-
		sary, to switch from the offline menu to Ready mode
X	Offline menu	Select menu items on a menu level or to select values on the
		parameter level
S	Offline menu	Reach a higher or lower menu level or set values on the
T		parameter level

Tab. 2: Button functions

8 Quick Operator’s Guide Edition 7/06