Installation, Scope of delivery | Brady BP-PR PLUS Series manual

BP-PR PLUS series

Installation

3 Installation

3.1Unpacking the transfer printer

⇒Lift the transfer printer out of the box via the straps.

⇒Check transfer printer for damage which may have occurred during transport.

⇒Check delivery for completeness.

Scope of delivery

•Transfer printer

•Empty cardboard core, mounted on ribbon take-up hub

•Tear-off plate (basic devices only)

Retain the original packaging for subsequent transport.

•Dispense plate (peel-off device ver- sion only)

•Power cable

•Documentation

3.2Setting up the transfer printer

CAUTION!

The device and the print media can be damaged by moisture and water.

⇒The transfer printer may only be set up in a dry place protected from sprayed water.

⇒Set up printer on a level surface.

1⇒ Open cover (1) of the transfer printer.

⇒Remove foam transportation safeguards near the printhead (2).

2

Fig. 1: Removing the transportation safeguards

Edition 7/06

Quick Operator’s Guide

5

Image 5

Brady BP-PR PLUS Series Installation, Unpacking the transfer printer, Setting up the transfer printer, Scope of delivery

Contents

Transfer Printer BP-PR Plus series Approval Intended use Safety and the environment Environmentally-friendly disposal Safety notesSafety and the environment Setting up the transfer printer InstallationInstallation Unpacking the transfer printer Switching the transfer printer on and off Connecting the transfer printerConnecting to the power supply Connecting to a computer or computer network Operating panel Symbol indicatorsLayout of the operating panel Functions of the operating panel during printing Button functions Power-Save mode Standard device Device typesPeel-off device version Device types Loading labels from a roll Removing and installing the core adapterLoading media Inserting a label strip into the printhead Positioning the label roll on the roll retainer Setting the label sensor Winding up the label strip in Rewind mode Winding up the liner in Peel-Off mode Setting the head locking system Loading transfer ribbon Removing a plate Setting the feed path of the transfer ribbonInstalling a plate Removing the locking system Removing and installing the locking systemInstalling the locking system Peel-Off mode Tear-Off modePrinting Synchronization General cleaning Cleaning and basic maintenanceCleaning the print roller Cleaning the printhead Cleaning the label sensor EC Declaration of Conformity EC Declaration of Conformity