Black Box Black Box High-Density Media Converter System II, LMC5208A-R2 manual To install a module

Installing SNMP Management and Application Modules

To install a module:

1.Remove the blank bracket (if present) covering the slot where the module will be installed. Black Box recommends installing blank brackets in unused module slots.

2.Slide the module into the chassis using the card guides.

3.Secure the module to the chassis by tightening the captive screw. (Refer to the documentation shipped with the module for configuration information.)

4.When installing modules observe ESD precautions, refer to the Electrostatic Discharge Precautions section.

In order to manage a 20-Slot Rackmount Chassis, the SNMP Management Module needs to be installed in the appropriate slot of the chassis.

ƒInstall the 20-Slot Rackmount Chassis SNMP Management Module into the first slot of the chassis.

NOTE

This slot is ONLY for the Management Module; do not install Application Modules such as

media conversion and mode conversion modules in this slot.

7