Dell EMC AX4-5 manual Check all cable connections, Advanced with, Minimum option

Page 51

Table A-1. General Cluster Troubleshooting (continued)

Problem

Probable Cause

Corrective Action

 

 

 

Unable to add a node to

The new node cannot

Ensure that the new cluster

the cluster.

access the shared

node can enumerate the cluster

 

disks.

disks using Windows Disk

 

The shared disks are

Administration. If the disks do

 

not appear in Disk

 

enumerated by the

 

Administration, check the

 

operating system

 

following:

 

differently on the

 

 

 

cluster nodes.

• Check all cable connections

 

 

• Check all zone configurations

 

 

• Check the LUN Settings. Use

 

 

the "Advanced" with

 

 

"Minimum" option

 

 

 

 

One or more nodes

Configure the Internet

 

may have the Internet

Connection Firewall to allow

 

Connection Firewall

communications that are

 

enabled, blocking

required by the MSCS and the

 

RPC communications

clustered applications

 

between the nodes.

or services.

 

 

See Microsoft Knowledge Base

 

 

article KB883398 at the

 

 

Microsoft Support website at

 

 

support.microsoft.com for more

 

 

information.

 

 

 

The disks on the shared

This situation is

No action required.

cluster storage appear

normal if you stopped

 

unreadable or

the Cluster Service. If

 

uninitialized in

you are running

 

Windows Disk

Windows Server 2003,

 

Administration

this situation is

 

 

normal if the cluster

 

 

node does not own the

 

 

cluster disk.

 

Appendix:Troubleshooting

51

Image 51
Contents Hardware Installation Troubleshooting Guide January 2010 Rev A01 Contents Advanced or Optional Storage Features Cluster Configuration OverviewInstalling Navisphere Storage System Installing the Expansion Pack UsingZoning Configuration Form Contents Introduction IntroductionCluster Hardware Requirements Cluster SolutionIdentical Cluster NodesLists the hardware requirements for the cluster nodes Cluster Node Requirements Component Minimum RequirementCluster Storage Cluster Storage RequirementsRequirement Supported Cluster Configurations Direct-Attached ClusterSystem Storage Expansion SAN-Attached Cluster Private networkStorage system Other Documents You May Need Fibre Channel switch Storage system Cluster nodePage Cabling Your Cluster Hardware Cabling the Power SuppliesCabling Your Cluster Hardware Cabling the Mouse, Keyboard, and MonitorAC PDU not shown Power strip or on oneCabling Your Cluster for Public and Private Networks Network Connections Description Cabling the Public Network Cabling the Private NetworkPrivate Network Hardware Components and Connections Method Cabling the Storage Systems NIC TeamingCabling Storage for Your Direct-Attached Cluster Private network AX4-5F storage system Cabling Your Cluster Hardware HBA portsAX4-5FX storage system Cabling Your Cluster Hardware Cabling Storage for Your SAN-Attached Cluster Private network Cluster nodeStorage system Cabling Your Cluster Hardware Cluster nodes Fibre Channel switch Connect cluster node 1 to the SAN Cabling a SAN-Attached Cluster to an AX4-5F Storage SystemAX4-5F storage system HBA ports Sw0 There is a maximum of four storage systems per cluster First cluster, connect cluster node 1 to the SANStorage systems Cabling Your Cluster Hardware Tape library Obtaining More InformationStorage systems Tape library Cabling Your Cluster Hardware Cabling Your Cluster Hardware Cluster Configuration Overview Preparing Your Systems for ClusteringPreparing Your Systems for Clustering Preparing Your Systems for Clustering Installation Overview Insert the PowerPath installation media in the CD/DVD drive Installing the Fibre Channel HBAsInstalling EMC PowerPath Installing the Fibre Channel HBA DriversUsing Worldwide Port Name Zoning Implementing Zoning on a Fibre Channel Switched FabricPort Worldwide Names in a SAN Environment Single Initiator ZoningInstalling Navisphere Storage System Initialization Utility Installing and Configuring the Shared Storage SystemUpgrade Installing the Expansion Pack Using Navisphere ExpressInstalling Navisphere Server Utility Registering a Server With a Storage SystemTo register the server with the storage system Assigning the Virtual Disks to Cluster Nodes Advanced or Optional Storage FeaturesSAN Copy Snapshot ManagementInstalling and Configuring a Failover Cluster Troubleshooting AppendixTroubleshooting If these events do not appear AppendixTroubleshooting Check all cable connections Advanced withMinimum option Window, click the Recovery Click ServicesServices window Cluster ServicesAppendixTroubleshooting AppendixTroubleshooting Number Appendix Cluster Data Form Cluster Data FormName Seed Appendix Cluster Data Form DAEsZone Name Zoning Configuration FormAppendix Zoning Configuration Form NodeAppendix Zoning Configuration Form Storage systems, 30 connecting to one shared storage IndexIndex Mscs Mouse cabling