RCA RP-3761 manual Setting time, Adjusting display brightness, Press and hold

Page 5

THE DIGITAL CD CLOCK RADIO

Protection against mains power failures:

--Connect a 9-volt battery

(IEC 6LR61 or NEDA 1604A)

--When the battery is used up, the digits flash on and off when the power comes back on

Battery compartment at the backside of the unit

NOTE: Alkaline (IEC 6LR61/NEDA 1604A) batteries are recommended. Carbon-zinc battery may be used but memory holding time will be substan- tially reduced. Memory holding time for a fresh alkaline battery is approxi- mately 8 hours (if radio or alarm are not operated) which should take care of short, nuisance-type AC power failures. To preserve battery life, the unit should remain plugged into an AC outlet. As the battery gets older, its voltage drops and memory may be lost. Be sure to replace the battery periodically. Battery should be removed if the unit will be stored for more than one month. Leaky battery can badly damage the clock radio.

Setting time

 

 

 

 

TIME SET

 

 

1

Press and hold

 

 

2

Press

or

1. Press and hold

or

 

to skip fast

 

 

2

 

 

2. The AM LED indicator will light to show AM time

Adjusting display brightness

 

 

You may slideOFF

DIMMER ON on the left side of the unit to vary the LED

display brightness. When you slide to OFF, the display will be

manintained at the brightness level; slide to ON, the display will vary

automatically according to the environment.

 

2

 

 

 

 

RP3761

6

 

 

7/20/00, 3:18 PM

Image 5
Contents Thomson Consumer Electronics USER’S Guide FCC Information For Your Safety Press and hold Setting timeAdjusting display brightness Sleep to CD/radio Listening to radioPress TurnTo pause playback To stop playback To select track Listening to compact discSetting alarm with music Setting alarm with toneAdjustingsnoozeduration StoppingalarmCorresponding alarms won’t sound again the following day Same timeLimited Warranty