Nortel Networks P5100 user manual ISound Settings, KAuto Off, Adjust the following sound settings

Basic Camera Setup: The Setup Menu

iSound Settings

Adjust the following sound settings.

Button sound

Turn button sound on or off.

When [On] (default setting) is selected, a beep will sound once when operations are completed successfully, twice when the camera acquires focus on the subject, and three times when an error is detected. Start-up sound will also play when the camera is turned on.

Shutter sound

Choose shutter sound from [On] (default setting) or [Off].

kAuto Off

If no operations are performed for the selected length of time, the monitor will turn off and the camera will enter standby mode (A23) to reduce the drain on the battery. The power-on lamp will blink in standby mode. If no operations are performed for about another three minutes, the camera will turn off automatically. Choose the time allowed to elapse before the camera enters standby mode. The time options are [30s], [1m] (default setting), [5m], and [30m].

Shooting, Playback and Setup Menus

CNotes on Auto Off

Regardless of the option selected, the monitor will remain on for three minutes when menus are displayed, or for 30 minutes during continuous playback for slide shows or when the AC Adapter

130EH-62A (available separately from Nikon) is connected.