Nortel Networks P5100 PReset User Setting, QDistortion Control, Restrictions on Camera Settings

Shooting Options: The Shooting Menu

PReset User Setting

Choose [Yes] to restore all settings in the selected user setting bank to their default values. For further information on settings that can be stored in user setting banks, see [User setting] (A111).

QDistortion Control

Specify whether or not the distortion is corrected. Enabling distortion control reduces the size of the frame.

QOn

Distortion at frame peripheries is corrected.

kOff (default setting)

No distortion correction performed.

Shooting, Playback and Setup Menus

Restrictions on Camera Settings

Restrictions apply to the following settings in A (auto), P, S, A, M, and B (high sensitivity) modes.

Flash mode

Flash mode is disabled (W) when [Continuous], [BSS], or [Multi-shot 16] is selected for [Continuous], when [Auto bracketing] is enabled, or at [Converter] settings of [Wide-angle converter] or [Telephoto converter]. When [Continuous] is set to [Continuous flash], the flash mode is set to X. Applied setting is restored when [Single] or [Intvl timer shooting] is selected for [Continuous], or [Auto bracketing] is turned off.

Self-timer

If self-timer is on, only one picture will be shot when shutter is released, regardless of settings chosen for [Continuous] and [Auto bracketing]. Applied [Continuous] and [Auto bracketing] settings are restored when picture is shot or self-timer is turned off.

112