Nortel Networks P5100 user manual Attaching Converter Lenses, 138

Optional Accessories

Attaching Converter Lenses

Attach the Wide-angle Converter WC-E67 and Telephoto Converter TC-E3ED (available separately from Nikon) as described below (the illustrations show the WC-E67). See the converter instruction manual for details.

1 Remove the lens ring.

Turn the camera off and remove the lens ring as shown at right.

2Remove the rear cap from the converter lens.

Technical Notes

3 Attach the Step-down Ring Adapter UR-E20 and the converter (available separately from Nikon).

Attach the Step-down Ring Adapter UR-E20 to the camera lens 1. Then

screw the converter lens into the Step-down Ring Adapter UR-E20 2.

4Choose a [Converter] option.

Rotate the mode dial to P (Programmed Auto), S (Shutter-Priority Auto), A (Aperture- Priority Auto), M (Manual), or B(High sensitivity) and select the appropriate converter type for the [Converter] option in the camera shooting menu (A110).

5 Remove the lens cap.

Remove the front cap from the converter lens.

Rotate the mode dial to P, S, A, M, or B when using converter lenses (available separately from Nikon). To remove the converter, turn the camera off and perform steps 1 to 4 in reverse order. Set the [Converter] option in the camera shooting menu (A110) to [None] when no converter is attached.

138