Nortel Networks P5100 user manual Shooting in Anti-shake Mode, Anti-shake Mode Settings

Anti-shake Mode

Shooting in Anti-shake Mode

In anti-shake mode, [Vibration reduction] (A128) is enabled, and [BSS] is selected for [Continuous] (A101). In addition, ISO sensitivity is automatically raised to 1600 depending upon the brightness of the subject, and shutter speed is faster than with A (auto) mode, under the same lighting conditions, to reduce blurring caused by camera shake or subject movement. The flash is disabled. This mode is most effective when shooting under natural light. Combine it with the telephoto zoom when you are forced to shoot from a distance, in order to capture a fleeting expression on a portrait subject or to photograph an animal without frightening it off.

1Rotate the mode dial to a.

2Frame the subject and shoot.

Camera focuses on subject in center of frame.

While the shutter-release button is held down, camera shoots up to ten pictures. They are compared and sharpest picture (picture with highest level of detail) is saved.

			E
F	1/125	F4.3	17

Anti-shake Mode

BNotes on Anti-shake Mode

•Shutter speed is limited to a certain value for dark subjects.

•Use of the high-sensitivity shooting mode (A44) is recommended for shooting subjects under low lighting.

•Pictures shot in this mode may become somewhat grainy.

CAnti-shake Mode Settings

[Vibration reduction] (A128) is enabled, and [BSS] is selected for [Continuous] (A101); the flash mode is disabled. Focus mode and exposure compensation are available; the self-timer is not available.

DImage Quality and Image Size in Anti-shake Mode

When dis pressed in anti-shake mode, the anti-shake mode menu is displayed to enable adjustment of image quality (A91) and image size (A92) settings. Changes made to these settings apply to all shooting modes.

43