Nortel Networks P5100 Taking a Closer Look Playback Zoom, Zoom To g i, to a maximum of 10×

Taking a Closer Look: Playback Zoom

Rotating the zoom control to g(i) (playback zoom) during full-frame playback mode (A28) zooms the current picture in 3×, with the center of the picture displayed in the monitor (Quick Playback Zoom). The guide at lower right shows which portion of the picture is enlarged. Change the portion of the picture displayed by pressing the multi selector H, I, Jor K. When using playback zoom with pictures shot using the face-priority function, the picture will be enlarged, with the face recognized during shooting, at the center of the monitor. If more than one face was recognized, the picture would be enlarged with the face, on which focus was acquired, at the center of the monitor. Press the multi selector H, I, J, or Kto display a different recognized face.

The magnification ratio can be changed further by operating the zoom control. The zoom ratio will be displayed in the monitor, and can

be increased up to 10×. The following operations can be performed while pictures are zoomed in.

X 3 . 0

X 2 . 0

X 4 . 0

More on Playback

To	Use	Description	A
		Zoom increases each time the zoom control is rotated
Zoom in	g(i)	to g(i), to a maximum of 10×.	–
		Zoom also increases by rotating the command
		dial to right.
		Zoom decreases each time the zoom control is
		rotated to f(h). When the magnification ratio
Zoom out	f(h)	reaches 1×, the display returns to full-frame	–
		playback mode.
		Zoom also decreases by rotating the command
		dial to left.
View other areas		Press the multi selector H, I, Jor Kto move	10
of picture		to areas of the picture not visible in the monitor.
Switch to full-	k	Press k.	28
frame playback
Crop picture	d	Press dto crop current picture to contain only	56
		the portion visible in the monitor.
	c	Press cor the shutter-release button to switch
Switch to			28
shooting mode		to the mode selected with the mode dial.

53