Nortel Networks P5100 user manual Error Messages, 144

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

	Display	Problem		Solution	A
	O(blinks)	Clock not set.	Set clock.		123
	B	Battery running low.	Prepare to charge or		14, 16
			change battery.
	N	Battery exhausted.	Charge or change battery.		14, 16
	Warning!
	Battery exhausted.
	P	Camera cannot perform	Wait until message clears		27
	Warning!!	other operations until	from display automatically
	Please wait for the	recording is complete.	when recording is
	camera to finish		complete.
	recording.
	O
	N	Write-protect switch is in	Slide write-protect switch		21
	Memory card is write	“lock” position.	to “write” position.
	protected.
	P	Error accessing memory	•	Use approved card.	137
	This card cannot be used.	card.	•	Check that connectors	20
			•	are clean.
	P			Confirm that memory	20
				card is correctly inserted.
	Warning!
	This card cannot be
	read.
	P	Memory card has not been	Choose [Yes] and press k		21
	Card is not formatted.	formatted for use in	to format card, or turn
	Format card?	camera.	camera off and replace
	No		card.
	Yes
Technical	N	Memory card is full.	•	Choose lower image	91, 92
	Out of memory.		• Delete pictures or sound		28, 70,
				quality or smaller image
				size.
Notes				files.	74, 118
			• Insert new memory card.		20
			•	Remove memory card	21
				and use internal
				memory.

144