Nortel Networks P5100 user manual Turn the Camera On and Select AAuto Mode, Exposures remaining

Basic Photography and Playback:

Basic Photography and Playback: Auto Mode

Step 1 Turn the Camera On and Select A(Auto) Mode

This section describes how to shoot in A (auto) mode, an automatic, “point-and- shoot” mode recommended for first-time users of digital cameras.

1 Rotate the mode dial to A.

2 Press the power switch to turn on the camera.

The power-on lamp will light, the monitor will turn on, and the lens will extend.

3 Check the battery level and number of	Battery level indicator
exposures remaining.

Auto Mode

Battery Level

Monitor	Description
NO INDICATOR Battery fully charged.

BBattery low; prepare to charge or replace the battery.

N		Cannot shoot pictures. Recharge
	Warning!
		or replace with a fully-charged
	Battery
		battery.
	exhausted.

Number of Exposures Remaining

A
F	1/125	F4.3	17

Number of exposures remaining

The number of pictures that can be stored depends on the capacity of the memory or memory card, image quality, and image size.

22