Shooting Options: The Shooting Menu

Shooting, Playback and Setup Menus

NConverter

This option is for use with the Step-down Ring Adapter UR-E20 (available separately from Nikon) to attach the converter lenses (available separately from Nikon) listed below. For more information, see “Attaching Converter Lenses” (A138) of this manual or the documentation provided with the converter lens.

kNone (default setting)

No modifications made to camera settings. Use when no converter lens is attached (be sure to remove lens adapter ring).

XWide-angle converter

Use with the Wide-angle Converter WC-E67. When selecting this option, the camera is zoomed out to the maximum wide-angle position. Enjoy wide-angle shooting at a focal length of roughly 23.5 mm (0.9 in.) (equivalent with 35mm [135] picture angle) when [Distortion control] is set to [Off] and the camera is zoomed out to the maximum wide-angle position. The full range of optical zoom is available, however, by its very nature, best results are achieved with the camera zoomed out to the maximum wide-angle position. Digital zoom is not available.

WTelephoto converter

Use with the Telephoto Converter TC-E3ED. When selecting this option, the camera is zoomed to the maximum telephoto position. Enjoy telephoto shooting at a focal length of roughly 369 mm (14.5 in.) (equivalent with 35mm [135] picture angle) with the camera zoomed in to the maximum telephoto position. Optical zoom is limited

to near the maximum telephoto position. Focus mode (A33) cannot be adjusted.

At settings other than [None], the icon for the current setting is displayed in the monitor during shooting (A6).

110

Page 124
Image 124
Nortel Networks P5100 user manual Converter, 110, Telephoto converter