Programming
2 Select the desired ringer tone by using {V} or {^}.
3 Press {EDIT}, then press {OFF}.
Handset ringer on/off
You can turn the ringer on/off. The default setting is “ON”.
Handset
1 Press {FUNCTION} 5 times until “RINGER“ is displayed.
2 Select “ON” or “OFF” by using {V} or {^}. 3 Press {EDIT}, then press {OFF}.
Note:
L When the ringer is set to off, the handset does not ring for outside calls.
Dialing mode
If you cannot make calls, change this setting according to your telephone line service. The default setting is “TONE”. “TONE”: For tone dial service.
“PULSE”: For rotary pulse dial service.
Handset
1 Press {FUNCTION} 6 times until “DIAL MODE” is displayed.
2 Select “TONE” or “PULSE” by using {V} or {^}.
3 Press {EDIT}, then press {OFF}.
Resetting the handset to its default setting
Feature | Default setting | |
Display language | ENGLISH | |
|
| |
Area code | ||
|
| |
Handset ringer | RINGER TONE 1 | |
tone |
| |
|
| |
Handset ringer | ON | |
|
| |
Dial mode | TONE | |
|
| |
Default setting | NO | |
|
| |
Handset receiver | Vol. 2 | |
volume level |
| |
|
| |
|
|
|
Handset |
|
|
|
|
|
1 Press {FUNCTION} 7 times until “DEFAULT“ is displayed.
2 Select “YES” or “NO” by using {V} or {^}. 3 Press {EDIT}.
Note:
L The following items are retained:
–Redial number
–Caller list
–Phonebook items
–Day and time setting
–Greeting message
–Voice memos
–Caller messages
–Ring count setting
–Remote code
For assistance, please visit http://www.panasonic.com/help | 13 |
