Setting up the base unit | Panasonic KX-TG2130 specification

Preparation

Setting up the base unit

Connecting the AC adaptor and telephone line cord

Connect the telephone line cord until it clicks into the base unit (A) and telephone line jack (B). Connect the AC adaptor cord by pressing the plug firmly (C).

L Use only the included Panasonic AC adaptor PQLV203.

(120V AC, 60Hz)

Hook

To single-line telephone jack (RJ11C)

Note:

L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

L The unit will not work during a power failure. We recommend connecting a corded telephone to the same telephone line or to the same telephone jack using a Panasonic T-adaptor (page 3).

If you subscribe to a DSL service

Please attach a noise filter (contact your DSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:

–Noise is heard during conversations.

–Caller ID features (page 18) do not function properly.

To single-line telephone jack (RJ11C)

Noise filter

For assistance, please visit http://www.panasonic.com/help

7

Image 7

Panasonic KX-TG2130 operating instructions Setting up the base unit, Connecting the AC adaptor and telephone line cord

Contents

Operating Instructions Table of Contents Introduction Symbols used in these operating instructionsAbout these operating instructions Sales and support information Accessory informationIncluded accessories Additional/replacement accessories Save These Instructions Important safety instructions Battery InstallationMedical Routine care For best performanceBase unit location/avoiding noise Environment Connecting the AC adaptor and telephone line cord Setting up the base unitIf you subscribe to a DSL service Battery installation/replacement Setting up the handsetBattery charge/Handset registration Panasonic battery performance Operation Operating time Recharging the battery Base unit Controls Handset Base unit display items Programmable settings Handset ringer on/off Dialing mode Answering calls Pause button for PBX/long distance service usersTemporary ringer off Handset locator Useful features during a call Character table for entering names Key Handset phonebookStoring names and numbers Finding and calling a handset phonebook item Erasing all items in the handset phonebook Erasing an item in the handset phonebook Caller list Using Caller ID serviceWhat the display means Editing a caller’s phone number before calling back Viewing the caller list and calling back Screening calls Answering systemMemory capacity Turning the answering system on/off Prerecorded greeting message Recording a voice memo Key CommandVoice memo Remote operation Turning on the answering system remotely Using the answering system remotelyRemote commands Key Remote command Remote code Answering system settingsRing Select switch For Voice Mail service subscribers Wall mounting Headset optional Battery recharge Problem Cause/solution TroubleshootingGeneral use Problem Cause/solution Programmable settings Problem Cause/solution Caller ID Problem Cause/solution Problem Cause/solution Answering system Problem Cause/solution FCC and other information Useful Information Useful Information Specifications Warranty Limited Warranty Limits And Exclusions Customer Services Directory Customer services Panasonic Puerto Rico, Inc When you ship the productCopyright