Preparation
Setting up the handset
Battery installation/replacement
Insert the battery plug into the connector as shown in the picture. Then close the handset cover.
Black Red
Lead Lead
L If battery replacement is necessary, press the notch of the handset cover and slide it off. Remove the old battery and replace it with a new one.
Important:
L Use only the rechargeable Panasonic battery noted on page 3.
Attention:
A nickel cadmium battery that is recyclable powers the product you have purchased. At the end of its useful life, under various state and local laws, it is illegal to dispose
of this battery into your municipal waste stream. Please call
Battery charge/Handset registration
Place the handset on the base unit for about 12 hours before initial use.
L The CHARGE indicator lights.
L The handset should also be placed on the base unit when:
–the handset does not ring
–the handset and/or base unit have not been used for a while
–a power failure occurred
Note:
L To ensure that the battery charges properly, clean the charge contacts of the handset and base unit with a soft, dry cloth once a month. Clean more often if the unit is subject to the exposure of grease, dust, or high humidity.
8For assistance, please visit http://www.panasonic.com/help
