Programming

12 For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by
programming the following features.
Day and time
Set the correct day and time. When you
play back a message from the answering
system (page21), the unit an nounces the
day and time it was recorded.
1Press and hold {DAY/CHECK} until the
current day is announced, then release
{DAY/CHECK}.
2Press and hold {HOUR} until the
current hour is announced, then release
{HOUR}.
3Press and hold {MIN} until the current
minute is announced, then release
{MIN}.
LIf you keep holding down {MIN}, the
unit begins to announce the minutes
by 5-minute intervals. (Example: 20,
25, 30...)
Note:
LIf you want to check the current day and
time setting, press {DAY/CHECK} once
without holding.
LIf you do not set the day and time, “ ”
and the number of recorded messages
are alternately displayed while the
answering system is turned on. Day and
time announcements for caller message
will be incorrect.
Display language
You can select English, Spanish, or French
as the display language. The default
setting is “ENGLISH”.
1Press {FUNCTION} 2 times until
“LANGUAGE” is displayed.
2Select “ENG”, “ESP”, or “FRA” by using
{V} or {^}.
3Press {EDIT}, then press {OFF}.
Area code
We recommend storing your area code
before using Caller ID. Calls from the
same area will be recorded in the caller list
without the area code. You do not have to
remove it before calling back the caller or
storing in the phonebook.
1Press {FUNCTION} 3 times until “AREA
CODE” is displayed.
2Enter your area code (max. 3 digits).
3Press {EDIT}, then press {OFF}.
Handset ringer tone
You can change the ringer tone heard
when an outside call is received. There are
3 ringer tones. The default setting is
“RINGER TONE: 1”.
1Press {FUNCTION} 4 times until
“RINGER TONE” is displayed.
Base unit
Handset
Handset
Handset