Friedrich Room Air Conditioner specification

Friedrich Room Air Conditioner manual Through-the-Wall Installation Instructions-Optional

Through-the-Wall Installation Instructions-Optional

The case may be installed through-the-wall in both existing and new construction.

Read completely, then follow step-by-step.

NOTE: Obtain all materials locally for mounting the air conditioner through - the-wall.

IMPORTANT (cont.)

Secure with 14 wood screws anchored at Ieast an inch into the wall support structure.

NOTE: Drill pilot holes, if necessary, for proper installation. If the frame is oversized, use shims to prevent case distortion.

1IMPORTANT

Through-the-wall installation is not appropriate if any of the side or top louvers in the case will be obstructed by the wall.

All side and top louvers in the case must project on the outdoor side of the wall.

The room side of the case must project into the room far enough to maximize the balance of the unit.

The case must be installed level from side- to side and with a slight tilt from front to rear. Use a level; no more than a 1/2 bubble will be the correct case slant to the outside.

Lintel angle is required to support bricks or blocks above opening.

Flashing is required and should extend the length of the opening to ensure no inside cavity leakage occurs.

ARemove the air conditioner from the case. For specific instruction, refer to the Window Installation Instructions.

BMake certain that a wall receptacle is available close to the hole location or make arrangementsto install a receptacle.

FINISH THE WALL OPENING

Caulk all four sides on the outdoor side of the case to prevent moisture from getting through to the interior wall. Use of flashing (drip rail) will further prevent water from dripping inside the wall and down the outsida of the building.

Place the case in the wall opening and place wood support strips between the case bottom and the flashing on both sides of the bottom rail. They should be the same height as the bottom rail and the same length as the wall opening.

Place the air conditioner into the case.

For specific instruction, refer to the Window Installation Instructions.

Room Air Conditioner specifications

Friedrich Room Air Conditioner stands as a premier choice for residential and commercial cooling needs. Renowned for its durability and performance, the Friedrich brand has been in the air conditioning market for decades, consistently delivering reliable solutions tailored to various environments.

One of the standout features of Friedrich Room Air Conditioners is their energy efficiency. Many models are equipped with inverter technology, which allows for variable speed operation. This means the units can maintain a consistent temperature without excessive energy consumption, resulting in lower utility bills. Furthermore, many models are ENERGY STAR rated, signifying that they meet or exceed energy efficiency guidelines set by the U.S. Environmental Protection Agency.

Another significant characteristic of Friedrich air conditioners is their robust construction. Designed with high-quality materials, these units often include corrosion-resistant components, making them suitable for coastal areas and environments with high humidity. The heavy-duty chassis provides added durability, ensuring that the air conditioner can withstand the test of time.

Friedrich air conditioners offer advanced features such as programmable timers and remote controls, allowing users to set and adjust their cooling preferences easily. Many models also integrate smart technology, enabling users to control their unit through mobile apps or voice-activated devices. This connectivity enhances convenience and further optimizes energy usage by allowing for remote access to adjust settings before arriving home.

The cooling performance of Friedrich Room Air Conditioners is commendable, with models available in various BTU ratings to cater to different room sizes. Their powerful compressors and efficient fan designs guarantee even air distribution, resulting in optimal cooling throughout the entire space. Additionally, some models feature a dual-filtration system that not only cools the air but also filters out dust and allergens, promoting a healthier indoor environment.

Noise reduction is another noteworthy aspect of Friedrich designs. Many models utilize quiet technology that significantly reduces operational noise, making them suitable for bedrooms and other noise-sensitive areas. This ensures a peaceful environment without compromising on cooling power.

In summary, Friedrich Room Air Conditioners combine energy efficiency, durability, advanced technology, and powerful cooling capabilities. With a focus on user convenience and comfort, these units provide an ideal solution for maintaining a pleasant indoor climate in both residential and commercial settings. Whether for a small room or a larger open space, Friedrich is a brand that stands out for its reliability and performance in the arena of air conditioning solutions.