OPERATION
INSTALLING BATTERY PACK
See Figure 4.
nWhile holding the caulk gun pointed away from you, lock the switch trigger by sliding the switch lock to the left. Place the battery pack on the tool. Make sure the latches on each side of the battery pack snap into place and the battery pack is secured on the tool before beginning operation.
CAUTION:
When placing battery pack in the tool, be sure raised rib on battery pack aligns with the bottom of the drill and latches into place properly. Improper installation of the battery pack can cause damage to internal components.
REMOVING THE BATTERY PACK
See Figure 4.
�n Lock the switch trigger by sliding the switch lock to the left.
�n Depress the latches on the side of battery pack. �n Remove the battery pack from the tool.
STARTING/STOPPING THE CAULK GUN
See Figure 5.
Before attempting to start the caulk gun, be sure the switch lock is in the unlocked position.
�n To turn the caulk gun ON, depress the switch trigger. �n To turn the caulk gun OFF, release the switch trigger.
LOCKING THE SWITCH TRIGGER
See Figure 5.
The switch trigger of the caulk gun can be locked off using the slide switch located above the switch trigger.
�n To lock the switch trigger, slide the switch lock left. This will prevent the caulk gun switch trigger from being de- pressed.
�n To unlock the switch trigger, slide the switch right. This will allow the caulk gun switch trigger to be depressed.
BATTERY PACK
LATCHES
DEPRESS LATCHES TO
RELEASE BATTERY PACK
Fig. 4
OFF 
ON
SWITCH
TRIGGER
LOCK
UNLOCK
SWITCH | Fig. 5 |
LOCK |
12