RIDGID R84040 manual Assembly

Page 9

FEATURES

KNOW YOUR ADHESIVE/CAULK GUN

See Figure 1.

Before attempting to use this product, familiarize yourself with all operating features and safety rules.

AUTO SHUT-OFF

When the caulk tube is empty, the auto shut-off feature will cause the motor to shut off.

CARRIAGE FRAME

The carriage frame will support a 30 oz. quart-size tube or a standard 10 oz. tube of caulk, depending on your applica- tion needs.

ELECTRONIC OVERLOAD PROTECTION

An electronic overload protection feature causes the motor to automatically shut down if too much pressure is exerted on the caulk tube.

JOIST FOLLOWER

Use the joist follower when applying adhesive to floor joists prior to installing sub-flooring, or on wall joists before install- ing sheetrock.

PLUNGER ROD

The forward movement of the plunger rod applies pressure to the bottom of an open caulk tube, causing caulk to be dispensed.

PLUNGER ROD HANDLE

The plunger rod handle is used to pull the plunger rod back, allowing caulk to be loaded.

PUNCTURE TOOL

For your convenience, a puncture tool is provided for break- ing the seal on a new tube of caulk. When using a partially filled caulk tube, the puncture tool can be used to remove any hardened material from the tube’s nozzle.

SWITCH LOCK

The switch lock prevents depression of the switch trigger.

SWITCH TRIGGER

Depressing the switch trigger starts the forward motion of the plunger rod.

VARIABLE SPEED SELECTOR

The plunger speed can be adjusted with the variable speed selector. This allows you to adjust the material feed rate to suit your particular application.

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

nCarefully remove the tool and any accessories from the box.

nMake sure that all items listed in the packing list are included.

nInspect the tool carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-866-539-1710 for assistance.

PACKING LIST

Adhesive/Caulk Gun

Joist Follower

Charger

Battery

Bag

Operator’s Manual

WARNING:

If any parts are missing or damaged, do not operate this tool until the missing parts are replaced. Failure to heed this warning could result in possible serious personal injury.

WARNING:

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

9

Image 9 Contents
OPERATOR’S Manual Introduction Table of ContentsElectrical Safety General Safety RulesPersonal Safety Work AreaService Specific Safety RulesSafety Rules for Charger Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Product Specifications FeaturesAssembly Operation LED Function of Charger LED Battery RED Green Action Indicator PackRemoving the Battery Pack Installing Battery PackLocking the Switch Trigger STARTING/STOPPING the Caulk GUNLoading Caulk Adjusting the Variable SpeedApplying Adhesive with the Joist Follower Installing the Joist FollowerApplying Caulk Maintenance General MaintenanceUsing the BAG Batteries Battery Pack Removal Preparation for RecyclingPage Warranty Customer Service Information
Related manuals
Manual 20 pages 10.66 Kb