RIDGID R84040 manual Batteries, Battery Pack Removal Preparation for Recycling

Page 17

MAINTENANCE

BATTERIES

The battery pack for this tool is equipped with nickel- cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing.

The batteries in this tool have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.

To obtain the longest possible battery life, we suggest the following:

nRemove the battery pack from the charger once it is fully charged and ready for use.

For battery pack storage longer than 30 days:

nStore the battery pack where the temperature is below 80°F.

nStore battery packs in a “discharged” condition.

BATTERY PACK REMOVAL AND

PREPARATION FOR RECYCLING

To preserve natural resources, please recycle or dispose of batteries

properly.

This product contains nickel-cadmium

batteries. Local, state or federal laws

may prohibit disposal of nickel- cadmium batteries in ordinary trash.

Consult your local waste authority for information regarding available recycling and/or disposal options.

WARNING:

Upon removal, cover the battery pack’s terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

17

Image 17
Contents OPERATOR’S Manual Introduction Table of ContentsElectrical Safety General Safety RulesPersonal Safety Work AreaService Specific Safety RulesSafety Rules for Charger Symbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Product Specifications FeaturesAssembly Operation LED Function of Charger LED Battery RED Green Action Indicator PackRemoving the Battery Pack Installing Battery PackLocking the Switch Trigger STARTING/STOPPING the Caulk GUNLoading Caulk Adjusting the Variable SpeedApplying Adhesive with the Joist Follower Installing the Joist FollowerApplying Caulk Using the BAG MaintenanceGeneral Maintenance Batteries Battery Pack Removal Preparation for RecyclingPage Warranty Customer Service Information