Friedrich SV12A10, SV10A10, SV08A10 manual HOW to Install the Unit, Checking Installation

Page 12

3. INSTALLATION

3.1 HOW TO INSTALL THE UNIT

1.To avoid vibration and noise, make sure the unit is installed securely and firmly.

2.Install the unit where the sunlight does not shine directly on the unit.

If the unit receives direct sunlight, build an awning to shade the cabinet.

3.There should be no obstacle, like a fence, within 20" which might restrict heat radiation from the condenser.

4.To prevent reducing performance, install the unit so that louvers of the cabinet are not blocked.

5.Install the unit a little obliquely outward not to leak the condensed water into the room (about 1/4").

6.Install the unit with its bottom portion 30~60" above the floor level.

7.Stuff the foam between the top of the unit and the wall to prevent air and insects from getting into the room.

8.The power cord must be connected to an independent circuit. The green wire must be grounded.

9.Connect the drain tube to the base pan hole in the rear side if you need to drain (consult a dealer).

Plastic hose or equivalent may be connected to the drain tube.

Cooled air

30"~60"

Figure 19

AwningFence

Heat radiation

About 1/4"

Over 20"

3.2 CHECKING INSTALLATION

The setting conditions must be checked prior to initial starting.

The items mentioned below are especially important checking points when the installation is finished.

1.Grounding wire (Green or Green and Yellow) is provided in the power cord. The green wire must be grounded.

2.Connect to a single-outlet 15A circuit.

3.To avoid vibration or noise, make sure the air conditioner is installed securely.

4 Avoid placing furniture or draperies in front of the air inlet and outlet.

3.3.HOW TO DRAIN (When using drain pipe)

The air conditioner must be installed horizontally or tilted slightly to the outside for proper water drainage.

On exceptionally hot and humid days the air conditioner may overflow condensed water. If the air conditioner is used in hot and a high humidity zone, exchange the DRAIN CAP for the

DRAIN PIPE.(See Figure 20, Figure 21)

BASE PAN

Figure 20

1

BASE PAN

2

Figure 21

BOTTOM

DRAIN CAP

BOTTOM

DRAIN PIPE

— 12—

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Room Air Conditioner Service and Parts Manual Contents PrefaceSpecifications ModelsItems Features Control LocationsCooling only Model Disassembly Instructions Mechanical PartsFront Grille CabinetAIR Handling Parts AIR Guide and Turbo FANElectrical Parts Overload ProtectorCompressor Power Cord Rotary SwitchCapacitor ThermostatRefrigerating Cycle CondenserEvaporator Capillary Tube Pulling Vacuum HOW to Install the Unit Checking InstallationInstallation Kits Contents Window RequirementsTighten the nut. See Figure Casement Window Installation CurtainTroubleshooting Guide Outside DimensionsPiping System Unit runs but poor cooling Ineffective Cooling Fails to Start Room AIR Conditioner Voltage Limits Name Plate Rating Minimum MaximumComplaint Cause Remedy Complaint Cause Remedy Schematic Diagram Circuit DiagramQTY Description PER SETDescription QTY PER SET MarksExploded View W0CZZReplacement Parts List Model SV08A10, SV10A10, SV12A10Memo Memo Use Factory Certified Parts
Related manuals
Manual 27 pages 14.54 Kb

SV10A10, SV08A10, SV12A10 specifications

The Friedrich SV12A10, SV08A10, and SV10A10 are part of an advanced line of vertical machining centers designed for precision and efficiency in various industrial applications. Each model possesses distinct features and cutting-edge technologies, positioning them as ideal solutions for manufacturers seeking high-performance machinery.

The SV12A10 is characterized by its robust construction, offering a large working envelope that accommodates complex machining tasks. With a maximum spindle speed of 12,000 RPM, it enables efficient material removal and high surface finish quality. The machine is equipped with advanced linear guideways, providing smooth motion and reducing friction, which contributes to longer tool life and improved machining accuracy.

The SV08A10, on the other hand, is designed for compactness without compromising on performance. It combines a smaller footprint with high-speed capabilities, making it suitable for small to medium-sized workpieces. This model also incorporates a modern CNC control system that features user-friendly interfaces and powerful programming capabilities, streamlining operations and reducing setup times.

The SV10A10 strikes a balance between the two, offering a versatile solution that caters to diverse machining requirements. With a spindle speed of 10,000 RPM and a variety of optional attachments, it can handle a wide range of materials, from metals to plastics. Additionally, it features an automatic tool changer, which enhances productivity by minimizing downtime during tool swaps.

Common characteristics across these models include a rigid bed design that ensures stability during high-speed operations and thermal stability to mitigate expansion issues that could affect precision. All three models utilize advanced cooling systems that maintain optimal temperatures to preserve tool integrity and machining precision.

Moreover, these machines are equipped with integrated safety features, including emergency stop buttons and protective enclosures, ensuring a secure working environment. The CNC systems are also compatible with Industry 4.0 technologies, allowing for real-time monitoring and data analytics, which help optimize production processes.

In summary, the Friedrich SV12A10, SV08A10, and SV10A10 represent a range of machining solutions that blend precision engineering with innovative technology. Their versatility, high performance, and safety features make them excellent choices for manufacturers looking to enhance productivity and maintain high standards of quality in their operations.
Top Page Image Contents