Makita LS1020 specs

17.USE RECOMMENDED ACCESSORIES. Consult the owner's manual for recommended accessories. The use of improper accessories may cause risk of injury t o persons.

18.NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is accidentally contacted.

19.CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked t o determine that it will operate properly and perform its intended function - check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

20.DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.

21.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don't leave tool until it comes t o a complete stop.

22.When servicing use only identical replacement parts.

VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source w i t h voltage greater than that specified for the tool can result in SERIOUS INJURY t o the user - as well as damage t o the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source w i t h voltage less than the nameplate rating is harmful t o the motor.

LS1020 specifications

The Makita LS1020 is a powerful and versatile compound miter saw designed to handle a variety of cutting tasks with precision and ease. Known for its robust build and advanced features, the LS1020 is an ideal choice for both professional contractors and DIY enthusiasts.

One of the standout features of the LS1020 is its 10-inch blade. This allows for a maximum crosscut capacity of 12 inches, making it capable of handling wider materials effortlessly. The saw is powered by a 15-amp motor, delivering an impressive no-load speed of up to 5,000 RPM. This high-speed capability ensures clean and smooth cuts, reducing the need for additional finishing.

The LS1020 is equipped with an innovative miter angle range of 0 to 45 degrees to the left and right, allowing users to make precise miter cuts for a variety of applications. Additionally, the saw features a bevel range of 0 to 45 degrees, with positive stops at commonly used angles, simplifying the setup process for angle cuts.

User convenience is a priority in the design of the LS1020. The large table provides a stable work surface, and its extension wings offer additional support for larger workpieces. The saw also includes a built-in laser guide, which enhances accuracy by projecting a clear line onto the workpiece, ensuring that cuts are made exactly where intended.

Safety features are integrated into the LS1020 design to protect users during operation. A protective blade guard ensures that the saw blade is covered when not in use, while the electric brake stops the blade swiftly once the power switch is turned off. Additionally, the saw is designed with rubberized grips for secure handling and control.

Running on a direct drive system, the LS1020 minimizes vibration, enhancing both cutting precision and comfort during extended use. This saw's lightweight construction, combined with a carry handle, makes it easy to transport to different job sites.

In summary, the Makita LS1020 stands out as a reliable and efficient tool in the realm of compound miter saws. With its powerful motor, versatile cutting capabilities, user-friendly features, and safety measures, it is well-suited for a variety of woodworking projects, making it a valuable addition to any tool collection.