Additional Safety Rules

1. Wear eye protection.

2.Do not operate saw without guards in place.

3.Don’t use the tool in the presence of flammable liquids or gases.

4.Check the blade carefully for cracks or damage before operation. Replace cracked or damaged blade immediately.

5.Use only flanges specified for this tool.

6.Be careful not t o damage the arbor, flanges (especially the installing sur- face) or bolt. Damage t o these parts could result in blade breakage.

7.Make sure that the turn base is properly secured so it will not move during operation.

8.For your safety, remove the chips, small pieces, etc. from the table top be- fore operation.

9.Avoid cutting nails. Inspect for and remove all nails from the workpiece be- fore operation.

IO. Make sure the shaft lock is released before the switch is turned on.

1 1 . Be sure that the blade does not contact the turn base in the lowest position.

12.Hold the handle firmly.

13.Do not perform any operation freehand.

14.Keep hands out of path of saw blade.

15.Never reach around saw blade.

16.Make sure the blade is not contacting the workpiece before the switch is turned on.

17.Before using the tool on an actual workpiece, let it run for a while. Watch for vibration or wobbling that could indicate poor installation or a poorly balanced blade.

18.Wait until the blade attains full speed before cutting.

19.Stop operation immediately if you notice anything abnormal.

20.Do not attempt t o lock the trigger in the on position.

21.Shut off power and wait for saw blade t o stop before servicing or adjusting tool.

22.Don’t abuse cord. Never yank cord t o disconnect it from the receptacle. Keep cord away from heat, oil, water and sharp edges.

SAVE THESE INSTRUCTIONS.

LS1020 specifications

The Makita LS1020 is a powerful and versatile compound miter saw designed to handle a variety of cutting tasks with precision and ease. Known for its robust build and advanced features, the LS1020 is an ideal choice for both professional contractors and DIY enthusiasts.

One of the standout features of the LS1020 is its 10-inch blade. This allows for a maximum crosscut capacity of 12 inches, making it capable of handling wider materials effortlessly. The saw is powered by a 15-amp motor, delivering an impressive no-load speed of up to 5,000 RPM. This high-speed capability ensures clean and smooth cuts, reducing the need for additional finishing.

The LS1020 is equipped with an innovative miter angle range of 0 to 45 degrees to the left and right, allowing users to make precise miter cuts for a variety of applications. Additionally, the saw features a bevel range of 0 to 45 degrees, with positive stops at commonly used angles, simplifying the setup process for angle cuts.

User convenience is a priority in the design of the LS1020. The large table provides a stable work surface, and its extension wings offer additional support for larger workpieces. The saw also includes a built-in laser guide, which enhances accuracy by projecting a clear line onto the workpiece, ensuring that cuts are made exactly where intended.

Safety features are integrated into the LS1020 design to protect users during operation. A protective blade guard ensures that the saw blade is covered when not in use, while the electric brake stops the blade swiftly once the power switch is turned off. Additionally, the saw is designed with rubberized grips for secure handling and control.

Running on a direct drive system, the LS1020 minimizes vibration, enhancing both cutting precision and comfort during extended use. This saw's lightweight construction, combined with a carry handle, makes it easy to transport to different job sites.

In summary, the Makita LS1020 stands out as a reliable and efficient tool in the realm of compound miter saws. With its powerful motor, versatile cutting capabilities, user-friendly features, and safety measures, it is well-suited for a variety of woodworking projects, making it a valuable addition to any tool collection.