Makita LS1020 guide

Maintaining maximum cutting capacity

Unplug the tool before any adjustment i s attempted.

This tool i s factory adjusted to provide the max. cutting capacity for a 255 mm ( I O ” ) saw blade. When the diameter of the blade has been reduced due to sharpening, loosen the hex nut a t the rear of the gear housing. Use a screwdriver to adjust the depth adjusting bolt. The saw blade i s lowered by turning the depth adjusting bolt counterclockwise and raised by turn- ing it clockwise. Adjust so that when the handle is in the fully lowered position,

there will be a distance of about 122 mm (4-3/4”)from the front face of the guide

fence to the point where the front edge of the blade enters the kerf. Now tighten the hex nut with the wrench while carefully holding the adjusting bolt in position with the screwdriver.

Positioning for miter angle

Loosen the grip by turning counterclock- wise. Press down the latch spring. This allows the turn base to turn freely. When you have moved the grip to the position where the pointer indicates the desired angle on the miter scale, release the latch spring and securely tighten the grip clock- wise.

GI in

NOTE :

The latch spring automatically locates miter angles select one of these angles, turn the turn base near latch spring and allow the latch spring to seat itself grip securely.

of 0, 15, 22.5, 30 and 45 degrees. To the desired angle while releasing the in the miter notch. Then tighten the

LS1020 specifications

The Makita LS1020 is a powerful and versatile compound miter saw designed to handle a variety of cutting tasks with precision and ease. Known for its robust build and advanced features, the LS1020 is an ideal choice for both professional contractors and DIY enthusiasts.

One of the standout features of the LS1020 is its 10-inch blade. This allows for a maximum crosscut capacity of 12 inches, making it capable of handling wider materials effortlessly. The saw is powered by a 15-amp motor, delivering an impressive no-load speed of up to 5,000 RPM. This high-speed capability ensures clean and smooth cuts, reducing the need for additional finishing.

The LS1020 is equipped with an innovative miter angle range of 0 to 45 degrees to the left and right, allowing users to make precise miter cuts for a variety of applications. Additionally, the saw features a bevel range of 0 to 45 degrees, with positive stops at commonly used angles, simplifying the setup process for angle cuts.

User convenience is a priority in the design of the LS1020. The large table provides a stable work surface, and its extension wings offer additional support for larger workpieces. The saw also includes a built-in laser guide, which enhances accuracy by projecting a clear line onto the workpiece, ensuring that cuts are made exactly where intended.

Safety features are integrated into the LS1020 design to protect users during operation. A protective blade guard ensures that the saw blade is covered when not in use, while the electric brake stops the blade swiftly once the power switch is turned off. Additionally, the saw is designed with rubberized grips for secure handling and control.

Running on a direct drive system, the LS1020 minimizes vibration, enhancing both cutting precision and comfort during extended use. This saw's lightweight construction, combined with a carry handle, makes it easy to transport to different job sites.

In summary, the Makita LS1020 stands out as a reliable and efficient tool in the realm of compound miter saws. With its powerful motor, versatile cutting capabilities, user-friendly features, and safety measures, it is well-suited for a variety of woodworking projects, making it a valuable addition to any tool collection.