Stanley Black & Decker HD01 user manual Troubleshooting

Page 16

TROUBLESHOOTING

PROBLEM

CAUSE

SOLUTION

Drill operates in only one

Reverse spool incorrectly installed.

Do not separate modules. Reassemble. See

direction. Forward or

 

Service section.

reverse.

 

 

Reverse spool faulty.

Do not separate modules. Replace reverse

 

 

spool. See Service section.

 

Tool hose flow is reversed.

Tool must not be reversed by reversing hose

 

 

flow. The tool is only designed for flow as

 

 

indicated by the designations cast on the

 

 

housing.

Drill runs too fast. Impact

Incorrect hydraulic flow.

Check the hydraulic power source is not

mechanism or screws

 

producing over 9 gpm/34 lpm at 750–2000

broken.

 

psi/53–140 bar.

 

Hydraulic flow reversed.

Correct the tool hoses. IN and OUT per

 

 

instructions and if the power supply valve is

 

 

reversible, reconnect the tool return hose to the

 

 

oil cooler or to the filter directly.

 

Priority valve faulty.

Do not separate modules. Remove, inspect and

 

 

replace priority valve if necessary. See Service

 

 

section.

Trigger operation erratic.

Trigger mechanism and strut area

Do not separate modules. Clean trigger area.

Control difficult.

blocked by debris.

See Service section.

Fluid leaks at housing seam.

Motor screws loose.

Separate modules. Tighten to recommended

 

 

torque.

 

Motor cap seal worn or missing.

Separate modules. Replace as required.

 

Motor cap/main housing damaged.

Separate modules. Replace as required.

Fluid leaks at reversing

Damaged o-rings.

Do not separate modules. Replace them as

spool.

 

required.

 

Wrong hydraulic fluid. Circuit too hot.

See Operation section for correct fluid/circuit

 

 

specifications.

 

Hydraulic pressure and return hoses

Correct hose connections.

 

reversed.

 

Fluid leak at air gap between

Oil leak at motor shaft seal.

Repair or replace. See Service section.

module.

 

 

Fluid gets hot. Power unit

Open center tool on a closed center

Use tools to match circuit.

working hard.

circuit or vice versa.

 

 

Circuit relief set too low.

Adjust relief valve to 2100–2250 psi/135–155

 

 

bar.

 

Too much fluid going through tool.

Adjust flow for 9 gpm/34 lpm maximum.

 

Circuit is generating high heat with flow

Use pump size and rpm for producing needed

 

controls.

flow only. Eliminate circuit heating causes.

 

Circuit has contaminants that have

Replace worn pump and valves. Install a large

 

caused wear and high heat generation.

clean filter and keep the fluid clean.

16 ► HD01 User Manual

Image 16
Contents HD01 Hydraulic Hammer Drill Declaration of Conformity Weisbeck, AndyTable of Contents Safety Symbols Local Safety RegulationsSafety Precautions Tool Stickers & Tags N G E RHose Safety Tags Hose TypesHose Recommendations Tool to Hydraulic Circuit Hose RecommendationsHtma / Ehtma Requirements Htma / Ehtma RequirementsOperation PRE-OPERATION ProceduresControls OPEN-CENTER CLOSED-CENTER OC/CC Mode Selector FIGDepth Gauge BIT Installation Drill OperationSide Handle Modes of OperationCold Weather Operation LubricationTool Protection & Care Hammer Drilling PercussionDual Spool Features for the HD01 Hammer Drill Lockout KIT OC/CCTroubleshooting Problem Cause SolutionTroubleshooting Accessories SpecificationsService Parts HD01 Parts Illustration HD01 Parts List QTY Description

HD01 specifications

Stanley Black & Decker has long been a trusted name in the tools and home improvement industry, and the HD01 model is a testament to the company’s commitment to excellence and innovation. The HD01 is a high-performance power tool that caters to both professionals and DIY enthusiasts, offering a blend of user-friendly features and cutting-edge technologies.

One standout feature of the Stanley Black & Decker HD01 is its powerful motor, designed to deliver impressive torque and speed, making it suitable for a variety of applications, from drilling into tough materials to driving screws with precision. This motor enables the HD01 to work efficiently in both heavy-duty and lighter tasks, ensuring versatility for users.

The design of the HD01 ensures comfort and control. Its ergonomic grip allows for extended use without causing unnecessary strain on the user’s hands. Furthermore, the tool's lightweight construction makes it easy to handle, even in tight spaces or when working overhead. These features are pivotal in ensuring that users can work for longer periods without fatigue.

In terms of technology, the HD01 incorporates a brushless motor, which not only improves the tool's longevity but also enhances performance. Brushless motors are known for their efficiency, translating to longer run times and reduced maintenance. This is an advantage that professionals, in particular, will appreciate, as it minimizes downtime on job sites.

Another characteristic of the HD01 is its variable speed settings, allowing users to adapt the tool’s performance to match the specific requirements of the task at hand. This feature enhances precision and control, whether the need is for a slow, steady approach or a rapid, powerful output.

The HD01 also comes equipped with advanced battery technology that provides longer run times and faster charging capabilities, ensuring that users can stay productive throughout their projects. The inclusion of an LED work light further amplifies its user-friendliness, illuminating work areas in low-light conditions and enhancing overall visibility.

In summary, the Stanley Black & Decker HD01 is a powerful, versatile, and user-centric tool designed to meet the needs of a diverse range of users. Its blend of innovative technologies and practical features makes it an essential addition to any toolkit, whether in the hands of a seasoned professional or a budding DIYer. With the HD01, Stanley Black & Decker continues to uphold its legacy of quality and innovation in power tools.