SAFETY PRECAUTIONS
WARNING
Do not operate the tool unless the following safety instructions have been thoroughly read and understood! Read this manual before installing, operating or maintaining this equipment.
A flying projectile from the tool, Rock or other material may enter the operator's compartment and cause serious or fatal injury to the operator. Personal protection equipment must be used.
A flying projectile from the tool Rock or other material may cause serious or fatal injury to bystanders. Never operate the tool when bystanders are in the work area.
On some machines/carriers, the tool
can enter the operator's compartment if it breaks loose and swings toward the operator. Make sure that suitable impact shields are used when operating the Tool with this type of equipment.
Do not operate the tool unless all safety decals described in this manual are in place. The decals must be inspected periodically to ensure that all wording is legible. The decals must be replaced if illegible. Replacement decals can be obtained from your authorized Stanley Distributor.
When operating the tool you must use ear protection, eye protection, and breathing protection.
Exposure to silica dust during construction activities can cause serious or fatal respiratory disease. Use adequate respiratory protection.
Read the Manual
Wear Breathing
Protection
Wear Hearing
Protection
Wear Eye
Protection
6 DH USER MANUAL