Lincoln Electric IM709 manual Installation, Voltage Specification Input Connection Specification

Page 8

A-1

INSTALLATION

A-1

TECHNICAL SPECIFICATIONS - Demo Zone (K-1854-1)

ELECTRICAL INPUT REQUIREMENTS

Voltage Specification

Input Connection Specification

230 VAC single phase, 40 amps

Type 6-50P plug

RATED OUTPUT

The Demo Zone is intended for display and demonstration use. It is intended for light duty operation. The Demo Zone operator must observe the 40 amp input current limitation. Because of the input power limitation, power sources (except Ranger 250) when used at maximum output must be operated at low duty cycles. Refer to Welder Operation - Duty Cycle section of this manual.

PHYSICAL DIMENSIONS

HEIGHT

WIDTH

DEPTH

WEIGHT

53.00 in.

66.00 in.

53.00 in.

1707 lbs. (w/o gas cylinders)

 

 

 

2467 lbs. (with gas cylinders)

1346.2 mm

1676.4 mm

1346.2 mm

774.3 kg. (w/o gas cylinders)

 

 

 

1119.0 kg. (with gas cylinders)

 

 

 

 

DEMO ZONE

Image 8
Contents Safety Depends on You Demo ZoneSafety California Proposition 65 WarningsElectric Shock can kill Welding Sparks can cause fire or explosion IiiPrécautions DE Sûreté Sûreté Pour Soudage a L’ArcThank You Table of Contents Installation Voltage Specification Input Connection SpecificationOutput Cables Connections Safety PrecautionsInput and Grounding Connections Installation of Field Installed Options Caster Wheels Part of K1848-1Location Engine ExhaustWelding Smoke and Fume StackingRecommended Processes and Equipment OperationGeneral Description Design Features Additional Safety PrecautionsRecommended Equipment / Interface Regulatory RequirementsDuty Cycle Auxiliary Power OperationWelder Operation Field Installed Options / Accessories AccessoriesFactory Installed Options / Accessories Maintenance Routine MaintenancePeriodic Maintenance Perform the following daily routineTroubleshooting Demo Zone Wiring Diagram DiagramsDemo Zone Precaucion Warnung