Lincoln Electric 900 manual Processes Recommended Expendable Parts, Advantage Lincoln, Order

AUTOMATED SOLUTIONS

Tandem MIG™ 800 Amp Welding Torch

The Lincoln Tandem MIG 800 Amp Welding Torch is designed for medium duty robotic and hard automation applications. The streamline configuration with extended gooseneck profile is ideal for robotic applications that require reaching welding joints with restricted access.

The lightweight high strength machined aluminum torch construction provides precise wire placement that can be used on 5 kg load capacity and larger robot arms. The torch features a heavy-duty brass water-cooled gas nozzle, designed to minimize spatter build-up and provide extended contact tip life.

Processes		Recommended Expendable Parts
Tandem MIG	Dual Wire GMAW		Wire liners, contact tips, diffusers, nozzles, nozzle retainers and nozzle
			retainer insulators

Advantage Lincoln

•800 amp rating for mixed gases, 60% duty cycle designed to meet most light gauge steel applications.

•Wide range of useable wire diameters (.035-.062 inches) provides versatility to fill a variety of application requirements.

•Cool operation for extended component life. Water-cooled nozzle extracts heat from the contact tips.

•Lightweight construction allows use with most common robot arms.

•Extended length goosenecks provide access to tight weld joint locations.

•22 degree goosenecks provide positive wire contact at the contact tip.

•Two process derived contact tip spacing and angularity options.

•Large contact tip to diffuser seating area for cooler contact tip operation.

•Separate routing of air blast hose provides a nozzle cleaning option without compromising shielding gas supply lines.

Recommended Wire Feeders

Power Feed 10 Robotic Wire Feeders K1780-1* or K1780-2* *Requires use of K1500-1 gun connector

Recommended Power Sources

Tandem MIG power sources:

K2262-1-TM	Tandem MIG Power Wave 455M Robotic
K1519-1-TM	Tandem MIG Power Wave 655 Robotic

Order

S22693-XXX Tandem MIG 800 Amp Welding Torch

Rated Current with Mixed Gas (Argon-90%, C02-10%)

Current Per Electrode:	100% duty
Total Current:	60% duty
	100% duty
(both electrodes)	60% duty
	Amps	200	300	400	500	600	700	800	900	1000	1100

For additional Tandem MIG information, request Tandem MIG Process document E10.60.

Publication E10.60.1 2/05

www.lincolnelectric.com