Section 1
Section 2
Section 3
Section 4
Section 5
SPECIFICATIONS
Wire Diameter Capacity | .030 - 1/16" ALL Types |
Wire Capacity | 12" Standard |
(Insulated or |
|
Power Input | 42 VAC 50/60 Hz, |
............................................................................ | 150 Watts Peak (3 amps) |
Weight | 31 pounds |
Shipping Weight | 36 pounds |
For Use with these Lincoln Torches | K1589,K1590,K1591,K1592 |
SUPPORT EQUIPMENT REQUIRED
C.V. or C.C. Power Source of Sufficient Capacity for Your Needs.
Regulated Gas Supply and Hoses.
Properly Sized Power Leads from Power Source to Wire Feeder and Ground.
Water Source and Hose Capable of Providing a Minimum of 1 qt/min. at 45 p.s.i. when using water cooled torches.
COOLANT RECOMMENDATIONS
1.Use a
2.Check coolant periodically to remain within limits of the following:
A.Coolant Flow rate - 1 quart/minute at 45 p.s.i.
B.Resistivity - 10K ohms/centimeter
C.Ph Range -
D.Particle Size
OPTIONAL ACCESSORIES
Replacement Plastic Guides for Slave Motor
| Lincoln | MK Products |
Inlet Guide | ||
Outlet Guide with Knob |
INSTALLATION
5.1 LOCATION
The cabinet should be placed in a location where it can be protected from damage. Lead lengths and accessibility must also be considered when installing the cabinet.